[options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath sencha-touch, using log file: /var/log/proxmox-nixos-update/sencha-touch/2025-06-20.log sencha-touch 0 -> 1 attrpath: sencha-touch [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - sencha-touch-2.4.2 Press Enter key to continue... Running update for: - sencha-touch-2.4.2: UPDATING ... - sencha-touch-2.4.2: ERROR --- SHOWING ERROR LOG FOR sencha-touch-2.4.2 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/sencha-touch/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/sencha-touch/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/sencha-touch/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR sencha-touch-2.4.2 ---------------------- The update script for sencha-touch-2.4.2 failed with exit code 1 [result] Failed to update sencha-touch 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath socket, using log file: /var/log/proxmox-nixos-update/socket/2025-06-20.log socket 0 -> 1 attrpath: socket [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-Socket-2.038 Press Enter key to continue... Running update for: - perl5.38.2-Socket-2.038: UPDATING ... - perl5.38.2-Socket-2.038: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update socket 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath datadumper, using log file: /var/log/proxmox-nixos-update/datadumper/2025-06-20.log datadumper 0 -> 1 attrpath: datadumper [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-DataDumper-2.183 Press Enter key to continue... Running update for: - perl5.38.2-DataDumper-2.183: UPDATING ... - perl5.38.2-DataDumper-2.183: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update datadumper 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath proxmox-acme, using log file: /var/log/proxmox-nixos-update/proxmox-acme/2025-06-20.log proxmox-acme 0 -> 1 attrpath: proxmox-acme [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - proxmox-acme-1.5.1 Press Enter key to continue... Running update for: - proxmox-acme-1.5.1: UPDATING ... - proxmox-acme-1.5.1: ERROR --- SHOWING ERROR LOG FOR proxmox-acme-1.5.1 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-acme/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-acme/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-acme/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR proxmox-acme-1.5.1 ---------------------- The update script for proxmox-acme-1.5.1 failed with exit code 1 [result] Failed to update proxmox-acme 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-rs, using log file: /var/log/proxmox-nixos-update/pve-rs/2025-06-20.log pve-rs 0 -> 1 attrpath: pve-rs [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-rs-0.9.1 Press Enter key to continue... Running update for: - pve-rs-0.9.1: UPDATING ... - pve-rs-0.9.1: ERROR --- SHOWING ERROR LOG FOR pve-rs-0.9.1 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-rs/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-rs/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-rs/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR pve-rs-0.9.1 ---------------------- The update script for pve-rs-0.9.1 failed with exit code 1 [result] Failed to update pve-rs 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath termproxy, using log file: /var/log/proxmox-nixos-update/termproxy/2025-06-20.log termproxy 0 -> 1 attrpath: termproxy [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - termproxy-1.1.0 Press Enter key to continue... Running update for: - termproxy-1.1.0: UPDATING ... - termproxy-1.1.0: ERROR --- SHOWING ERROR LOG FOR termproxy-1.1.0 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Name or service not known) --- SHOWING ERROR LOG FOR termproxy-1.1.0 ---------------------- The update script for termproxy-1.1.0 failed with exit code 1 [result] Failed to update termproxy 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath extjs, using log file: /var/log/proxmox-nixos-update/extjs/2025-06-20.log extjs 0 -> 1 attrpath: extjs [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - extjs-7.0.0-5 Press Enter key to continue... Running update for: - extjs-7.0.0-5: UPDATING ... - extjs-7.0.0-5: ERROR --- SHOWING ERROR LOG FOR extjs-7.0.0-5 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/extjs/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/extjs/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/extjs/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR extjs-7.0.0-5 ---------------------- The update script for extjs-7.0.0-5 failed with exit code 1 [result] Failed to update extjs 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath uuid, using log file: /var/log/proxmox-nixos-update/uuid/2025-06-20.log uuid 0 -> 1 attrpath: uuid [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-UUID-0.37 Press Enter key to continue... Running update for: - perl5.38.2-UUID-0.37: UPDATING ... - perl5.38.2-UUID-0.37: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update uuid 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-rados2, using log file: /var/log/proxmox-nixos-update/pve-rados2/2025-06-20.log pve-rados2 0 -> 1 attrpath: pve-rados2 [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-rados2-1.4.1 Press Enter key to continue... Running update for: - pve-rados2-1.4.1: UPDATING ... - pve-rados2-1.4.1: ERROR --- SHOWING ERROR LOG FOR pve-rados2-1.4.1 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-rados2/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-rados2/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-rados2/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR pve-rados2-1.4.1 ---------------------- The update script for pve-rados2-1.4.1 failed with exit code 1 [result] Failed to update pve-rados2 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath linstor-client, using log file: /var/log/proxmox-nixos-update/linstor-client/2025-06-20.log linstor-client 0 -> 1 attrpath: linstor-client [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - linstor-client-1.23.0 Press Enter key to continue... Running update for: - linstor-client-1.23.0: UPDATING ... - linstor-client-1.23.0: ERROR --- SHOWING ERROR LOG FOR linstor-client-1.23.0 ---------------------- Traceback (most recent call last): File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/urllib/request.py", line 1344, in do_open h.request(req.get_method(), req.selector, req.data, headers, File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/http/client.py", line 1338, in request self._send_request(method, url, body, headers, encode_chunked) File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/http/client.py", line 1384, in _send_request self.endheaders(body, encode_chunked=encode_chunked) File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/http/client.py", line 1333, in endheaders self._send_output(message_body, encode_chunked=encode_chunked) File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/http/client.py", line 1093, in _send_output self.send(msg) File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/http/client.py", line 1037, in send self.connect() File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/http/client.py", line 1472, in connect super().connect() File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/http/client.py", line 1003, in connect self.sock = self._create_connection( ^^^^^^^^^^^^^^^^^^^^^^^^ File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/socket.py", line 841, in create_connection for res in getaddrinfo(host, port, 0, SOCK_STREAM): ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/socket.py", line 978, in getaddrinfo for res in _socket.getaddrinfo(host, port, family, type, proto, flags): ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ socket.gaierror: [Errno -2] Name or service not known During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/nix/store/cl2gbxa91q9bcjn4ffpx6ccfjmjdyf0p-nix-update-1.11.0/bin/.nix-update-wrapped", line 9, in sys.exit(main()) ^^^^^^ File "/nix/store/cl2gbxa91q9bcjn4ffpx6ccfjmjdyf0p-nix-update-1.11.0/lib/python3.12/site-packages/nix_update/__init__.py", line 347, in main package = update(options) ^^^^^^^^^^^^^^^ File "/nix/store/cl2gbxa91q9bcjn4ffpx6ccfjmjdyf0p-nix-update-1.11.0/lib/python3.12/site-packages/nix_update/update.py", line 540, in update update_hash = update_version( ^^^^^^^^^^^^^^^ File "/nix/store/cl2gbxa91q9bcjn4ffpx6ccfjmjdyf0p-nix-update-1.11.0/lib/python3.12/site-packages/nix_update/update.py", line 446, in update_version new_version = fetch_latest_version( ^^^^^^^^^^^^^^^^^^^^^ File "/nix/store/cl2gbxa91q9bcjn4ffpx6ccfjmjdyf0p-nix-update-1.11.0/lib/python3.12/site-packages/nix_update/version/__init__.py", line 101, in fetch_latest_version versions = fetcher(url) ^^^^^^^^^^^^ File "/nix/store/cl2gbxa91q9bcjn4ffpx6ccfjmjdyf0p-nix-update-1.11.0/lib/python3.12/site-packages/nix_update/version/github.py", line 34, in fetch_github_versions resp = urllib.request.urlopen(feed_url) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/urllib/request.py", line 215, in urlopen return opener.open(url, data, timeout) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/urllib/request.py", line 515, in open response = self._open(req, data) ^^^^^^^^^^^^^^^^^^^^^ File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/urllib/request.py", line 532, in _open result = self._call_chain(self.handle_open, protocol, protocol + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/urllib/request.py", line 492, in _call_chain result = func(*args) ^^^^^^^^^^^ File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/urllib/request.py", line 1392, in https_open return self.do_open(http.client.HTTPSConnection, req, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/nix/store/8w718rm43x7z73xhw9d6vh8s4snrq67h-python3-3.12.10/lib/python3.12/urllib/request.py", line 1347, in do_open raise URLError(err) urllib.error.URLError: --- SHOWING ERROR LOG FOR linstor-client-1.23.0 ---------------------- The update script for linstor-client-1.23.0 failed with exit code 1 [result] Failed to update linstor-client 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-novnc, using log file: /var/log/proxmox-nixos-update/pve-novnc/2025-06-20.log pve-novnc 0 -> 1 attrpath: pve-novnc [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-novnc-1.5.0-1 Press Enter key to continue... Running update for: - pve-novnc-1.5.0-1: UPDATING ... - pve-novnc-1.5.0-1: ERROR --- SHOWING ERROR LOG FOR pve-novnc-1.5.0-1 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-novnc/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-novnc/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-novnc/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Name or service not known) --- SHOWING ERROR LOG FOR pve-novnc-1.5.0-1 ---------------------- The update script for pve-novnc-1.5.0-1 failed with exit code 1 [result] Failed to update pve-novnc 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath iosocketip, using log file: /var/log/proxmox-nixos-update/iosocketip/2025-06-20.log iosocketip 0 -> 1 attrpath: iosocketip [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - perl5.38.2-IOSocketIP-0.42 Press Enter key to continue... Running update for: - perl5.38.2-IOSocketIP-0.42: UPDATING ... - perl5.38.2-IOSocketIP-0.42: ERROR --- SHOWING ERROR LOG FOR perl5.38.2-IOSocketIP-0.42 ---------------------- error: attribute 'iosocketip' in selection path 'iosocketip.name' not found warning: Git tree '/var/cache/proxmox-nixos-update/worker/worktree/iosocketip' is dirty warning: error: unable to download 'https://cache.nixos.org/n1ciiikmn92l8zsrynl6d3v3bzshkg6x.narinfo': Couldn't resolve host name (6); retrying in 268 ms warning: error: unable to download 'https://cache.nixos.org/n1ciiikmn92l8zsrynl6d3v3bzshkg6x.narinfo': Couldn't resolve host name (6); retrying in 542 ms warning: error: unable to download 'https://cache.nixos.org/n1ciiikmn92l8zsrynl6d3v3bzshkg6x.narinfo': Couldn't resolve host name (6); retrying in 1225 ms warning: error: unable to download 'https://cache.nixos.org/n1ciiikmn92l8zsrynl6d3v3bzshkg6x.narinfo': Couldn't resolve host name (6); retrying in 2190 ms error: unable to download 'https://cache.nixos.org/n1ciiikmn92l8zsrynl6d3v3bzshkg6x.narinfo': Couldn't resolve host name (6) update-source-version: error: Couldn't figure out new hash of 'packages.x86_64-linux.iosocketip.src'! Failed to run command: update-source-version iosocketip 0.43 --- SHOWING ERROR LOG FOR perl5.38.2-IOSocketIP-0.42 ---------------------- The update script for perl5.38.2-IOSocketIP-0.42 failed with exit code 29 [result] Failed to update iosocketip 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-docs, using log file: /var/log/proxmox-nixos-update/pve-docs/2025-06-20.log pve-docs 0 -> 1 attrpath: pve-docs [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-docs-8.3.1 Press Enter key to continue... Running update for: - pve-docs-8.3.1: UPDATING ... - pve-docs-8.3.1: ERROR --- SHOWING ERROR LOG FOR pve-docs-8.3.1 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Name or service not known) --- SHOWING ERROR LOG FOR pve-docs-8.3.1 ---------------------- The update script for pve-docs-8.3.1 failed with exit code 1 [result] Failed to update pve-docs 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-common, using log file: /var/log/proxmox-nixos-update/pve-common/2025-06-20.log pve-common 0 -> 1 attrpath: pve-common [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-common-8.3.1 Press Enter key to continue... Running update for: - pve-common-8.3.1: UPDATING ... - pve-common-8.3.1: ERROR --- SHOWING ERROR LOG FOR pve-common-8.3.1 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-common/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-common/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-common/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR pve-common-8.3.1 ---------------------- The update script for pve-common-8.3.1 failed with exit code 1 [result] Failed to update pve-common 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-firewall, using log file: /var/log/proxmox-nixos-update/pve-firewall/2025-06-20.log pve-firewall 0 -> 1 attrpath: pve-firewall [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-firewall-5.0.7 Press Enter key to continue... Running update for: - pve-firewall-5.0.7: UPDATING ... - pve-firewall-5.0.7: ERROR --- SHOWING ERROR LOG FOR pve-firewall-5.0.7 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-firewall/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-firewall/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-firewall/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR pve-firewall-5.0.7 ---------------------- The update script for pve-firewall-5.0.7 failed with exit code 1 [result] Failed to update pve-firewall 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath fonts-font-logos, using log file: /var/log/proxmox-nixos-update/fonts-font-logos/2025-06-20.log fonts-font-logos 0 -> 1 attrpath: fonts-font-logos [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - fonts-font-logos-1.0.1-3 Press Enter key to continue... Running update for: - fonts-font-logos-1.0.1-3: UPDATING ... - fonts-font-logos-1.0.1-3: ERROR --- SHOWING ERROR LOG FOR fonts-font-logos-1.0.1-3 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/fonts-font-logos/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/fonts-font-logos/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/fonts-font-logos/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Name or service not known) --- SHOWING ERROR LOG FOR fonts-font-logos-1.0.1-3 ---------------------- The update script for fonts-font-logos-1.0.1-3 failed with exit code 1 [result] Failed to update fonts-font-logos 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath vncterm, using log file: /var/log/proxmox-nixos-update/vncterm/2025-06-20.log vncterm 0 -> 1 attrpath: vncterm [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - vncterm-1.8.0 Press Enter key to continue... Running update for: - vncterm-1.8.0: UPDATING ... - vncterm-1.8.0: ERROR --- SHOWING ERROR LOG FOR vncterm-1.8.0 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/vncterm/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/vncterm/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/vncterm/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR vncterm-1.8.0 ---------------------- The update script for vncterm-1.8.0 failed with exit code 1 [result] Failed to update vncterm 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath authenpam, using log file: /var/log/proxmox-nixos-update/authenpam/2025-06-20.log authenpam 0 -> 1 attrpath: authenpam [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - perl5.38.2-AuthenPAM-0.16 Press Enter key to continue... Running update for: - perl5.38.2-AuthenPAM-0.16: UPDATING ... - perl5.38.2-AuthenPAM-0.16: ERROR --- SHOWING ERROR LOG FOR perl5.38.2-AuthenPAM-0.16 ---------------------- Package Authen::PAM not found on CPAN. --- SHOWING ERROR LOG FOR perl5.38.2-AuthenPAM-0.16 ---------------------- The update script for perl5.38.2-AuthenPAM-0.16 failed with exit code 29 [result] Failed to update authenpam 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-cluster, using log file: /var/log/proxmox-nixos-update/pve-cluster/2025-06-20.log pve-cluster 0 -> 1 attrpath: pve-cluster [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-cluster-8.0.10 Press Enter key to continue... Running update for: - pve-cluster-8.0.10: UPDATING ... - pve-cluster-8.0.10: ERROR --- SHOWING ERROR LOG FOR pve-cluster-8.0.10 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR pve-cluster-8.0.10 ---------------------- The update script for pve-cluster-8.0.10 failed with exit code 1 [result] Failed to update pve-cluster 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-guest-common, using log file: /var/log/proxmox-nixos-update/pve-guest-common/2025-06-20.log pve-guest-common 0 -> 1 attrpath: pve-guest-common [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-guest-common-5.1.7 Press Enter key to continue... Running update for: - pve-guest-common-5.1.7: UPDATING ... - pve-guest-common-5.1.7: ERROR --- SHOWING ERROR LOG FOR pve-guest-common-5.1.7 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-guest-common/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-guest-common/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-guest-common/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR pve-guest-common-5.1.7 ---------------------- The update script for pve-guest-common-5.1.7 failed with exit code 1 [result] Failed to update pve-guest-common 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-http-server, using log file: /var/log/proxmox-nixos-update/pve-http-server/2025-06-20.log pve-http-server 0 -> 1 attrpath: pve-http-server [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-http-server-5.2.2 Press Enter key to continue... Running update for: - pve-http-server-5.2.2: UPDATING ... - pve-http-server-5.2.2: ERROR --- SHOWING ERROR LOG FOR pve-http-server-5.2.2 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Name or service not known) --- SHOWING ERROR LOG FOR pve-http-server-5.2.2 ---------------------- The update script for pve-http-server-5.2.2 failed with exit code 1 [result] Failed to update pve-http-server 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-xtermjs, using log file: /var/log/proxmox-nixos-update/pve-xtermjs/2025-06-20.log pve-xtermjs 0 -> 1 attrpath: pve-xtermjs [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-xtermjs-5.3.0-3 Press Enter key to continue... Running update for: - pve-xtermjs-5.3.0-3: UPDATING ... - pve-xtermjs-5.3.0-3: ERROR --- SHOWING ERROR LOG FOR pve-xtermjs-5.3.0-3 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-xtermjs/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-xtermjs/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-xtermjs/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: unable to look up git.proxmox.com (port 9418) (Temporary failure in name resolution) --- SHOWING ERROR LOG FOR pve-xtermjs-5.3.0-3 ---------------------- The update script for pve-xtermjs-5.3.0-3 failed with exit code 1 [result] Failed to update pve-xtermjs 0 -> 1