[options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath proxmox-i18n, using log file: /var/log/proxmox-nixos-update/proxmox-i18n/2025-08-06.log proxmox-i18n 0 -> 1 attrpath: proxmox-i18n [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - proxmox-i18n-3.2.4 Press Enter key to continue... Running update for: - proxmox-i18n-3.2.4: UPDATING ... - proxmox-i18n-3.2.4: ERROR --- SHOWING ERROR LOG FOR proxmox-i18n-3.2.4 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-i18n/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-i18n/pkgs/update.py", line 153, in main run_command(f'update-source-version {pkg_name} {version} --rev={rev}') File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-i18n/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'update-source-version proxmox-i18n 3.5.3 --rev=4d30bc02837f08d2af81b23340da4f2224ed6c86' failed with error: error: attribute 'proxmox-i18n' in selection path 'proxmox-i18n.name' not found warning: Git tree '/var/cache/proxmox-nixos-update/worker/worktree/proxmox-i18n' is dirty this derivation will be built: /nix/store/34ah38009fn22gw98s4iniq5sga86fhn-proxmox-i18n-4d30bc0.drv building '/nix/store/34ah38009fn22gw98s4iniq5sga86fhn-proxmox-i18n-4d30bc0.drv'... exporting git://git.proxmox.com/git/proxmox-i18n.git (rev 4d30bc02837f08d2af81b23340da4f2224ed6c86) into /nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0 Initialized empty Git repository in /nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/.git/ remote: Enumerating objects: 58, done. remote: Counting objects: 100% (58/58), done. remote: Compressing objects: 100% (50/50), done. remote: Total 58 (delta 28), reused 14 (delta 0), pack-reused 0 Unpacking objects: 100% (58/58), 1.54 MiB | 3.61 MiB/s, done. From git://git.proxmox.com/git/proxmox-i18n * branch 4d30bc02837f08d2af81b23340da4f2224ed6c86 -> FETCH_HEAD Switched to a new branch 'fetchgit' Submodule 'pmg-gui' (git://git.proxmox.com/git/pmg-gui) registered for path 'pmg-gui' Submodule 'pmg-yew-quarantine-gui' (git://git.proxmox.com/git/ui/pmg-yew-quarantine-gui.git) registered for path 'pmg-yew-quarantine-gui' Submodule 'proxmox-backup' (git://git.proxmox.com/git/proxmox-backup) registered for path 'proxmox-backup' Submodule 'proxmox-datacenter-manager' (git://git.proxmox.com/git/proxmox-datacenter-manager) registered for path 'proxmox-datacenter-manager' Submodule 'proxmox-widget-toolkit' (git://git.proxmox.com/git/proxmox-widget-toolkit) registered for path 'proxmox-widget-toolkit' Submodule 'proxmox-yew-comp' (git://git.proxmox.com/git/ui/proxmox-yew-comp.git) registered for path 'proxmox-yew-comp' Submodule 'proxmox-yew-widget-toolkit' (git://git.proxmox.com/git/ui/proxmox-yew-widget-toolkit.git) registered for path 'proxmox-yew-widget-toolkit' Submodule 'pve-manager' (git://git.proxmox.com/git/pve-manager) registered for path 'pve-manager' Submodule 'pve-yew-mobile-gui' (git://git.proxmox.com/git/ui/pve-yew-mobile-gui.git) registered for path 'pve-yew-mobile-gui' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-gui'... remote: Enumerating objects: 139, done. remote: Counting objects: 100% (139/139), done. remote: Compressing objects: 100% (124/124), done. remote: Total 139 (delta 15), reused 114 (delta 12), pack-reused 0 Receiving objects: 100% (139/139), 152.69 KiB | 4.63 MiB/s, done. Resolving deltas: 100% (15/15), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui'... fatal: read error: Connection reset by peer fatal: clone of 'git://git.proxmox.com/git/ui/pmg-yew-quarantine-gui.git' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui' failed Failed to clone 'pmg-yew-quarantine-gui'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-widget-toolkit'... remote: Enumerating objects: 190, done. remote: Counting objects: 100% (190/190), done. remote: Compressing objects: 100% (176/176), done. remote: Total 190 (delta 11), reused 127 (delta 7), pack-reused 0 Receiving objects: 100% (190/190), 228.89 KiB | 5.58 MiB/s, done. Resolving deltas: 100% (11/11), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-datacenter-manager'... remote: Enumerating objects: 263, done. remote: Counting objects: 100% (263/263), done. remote: Compressing objects: 100% (239/239), done. remote: Total 263 (delta 21), reused 158 (delta 8), pack-reused 0 Receiving objects: 100% (263/263), 309.78 KiB | 6.59 MiB/s, done. Resolving deltas: 100% (21/21), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui'... remote: Enumerating objects: 77, done. remote: Counting objects: 100% (77/77), done. remote: Compressing objects: 100% (68/68), done. remote: Total 77 (delta 17), reused 36 (delta 5), pack-reused 0 Receiving objects: 100% (77/77), 256.26 KiB | 5.82 MiB/s, done. Resolving deltas: 100% (17/17), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-manager'... remote: Enumerating objects: 661, done. remote: Counting objects: 100% (661/661), done. remote: Compressing objects: 100% (583/583), done. remote: Total 661 (delta 100), reused 441 (delta 65), pack-reused 0 Receiving objects: 100% (661/661), 900.57 KiB | 12.34 MiB/s, done. Resolving deltas: 100% (100/100), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui'... remote: Enumerating objects: 31, done. remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 100% (26/26), done. remote: Total 31 (delta 1), reused 18 (delta 1), pack-reused 0 Receiving objects: 100% (31/31), 17.77 KiB | 1.62 MiB/s, done. Resolving deltas: 100% (1/1), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-yew-comp'... remote: Enumerating objects: 108, done. remote: Counting objects: 100% (108/108), done. remote: Compressing objects: 100% (104/104), done. remote: Total 108 (delta 15), reused 31 (delta 1), pack-reused 0 Receiving objects: 100% (108/108), 185.98 KiB | 5.17 MiB/s, done. Resolving deltas: 100% (15/15), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-yew-widget-toolkit'... remote: Enumerating objects: 244, done. remote: Counting objects: 100% (244/244), done. remote: Compressing objects: 100% (234/234), done. remote: Total 244 (delta 17), reused 100 (delta 8), pack-reused 0 Receiving objects: 100% (244/244), 338.81 KiB | 6.91 MiB/s, done. Resolving deltas: 100% (17/17), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-backup'... remote: Enumerating objects: 923, done. remote: Counting objects: 100% (923/923), done. remote: Compressing objects: 100% (823/823), done. Receiving objects: 100% (923/923), 5.17 MiB | 34.17 MiB/s, done. remote: Total 923 (delta 105), reused 526 (delta 63), pack-reused 0 Resolving deltas: 100% (105/105), done. Submodule path 'pmg-gui': checked out '220423d5555948dc791c68d4d4cd4904d1d28290' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 15, done. remote: Counting objects: 100% (15/15), done. remote: Compressing objects: 100% (8/8), done. remote: Total 8 (delta 6), reused 2 (delta 0), pack-reused 0 Unpacking objects: 100% (8/8), 1.08 KiB | 1.08 MiB/s, done. From git://git.proxmox.com/git/ui/pmg-yew-quarantine-gui * branch 73f6536f1f83bfa85e687c3ff878b0fd7d099025 -> FETCH_HEAD Submodule path 'pmg-yew-quarantine-gui': checked out '73f6536f1f83bfa85e687c3ff878b0fd7d099025' Submodule 'pwt-assets' (gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets) registered for path 'pmg-yew-quarantine-gui/pwt-assets' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets' a second time, aborting fatal: Failed to recurse into submodule path 'pmg-yew-quarantine-gui' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 121, done. remote: Counting objects: 100% (121/121), done. remote: Compressing objects: 100% (66/66), done. remote: Total 66 (delta 52), reused 7 (delta 0), pack-reused 0 Unpacking objects: 100% (66/66), 28.78 KiB | 1.69 MiB/s, done. From git://git.proxmox.com/git/proxmox-backup * branch f86dc92503f0861596f12ad038cd999d1daf5c5f -> FETCH_HEAD Submodule path 'proxmox-backup': checked out 'f86dc92503f0861596f12ad038cd999d1daf5c5f' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 76, done. remote: Counting objects: 100% (76/76), done. remote: Compressing objects: 100% (38/38), done. remote: Total 39 (delta 30), reused 9 (delta 0), pack-reused 0 Unpacking objects: 100% (39/39), 6.54 KiB | 1.63 MiB/s, done. From git://git.proxmox.com/git/proxmox-datacenter-manager * branch cbd7d41f4ecba9d94c99cbca32235d328976b418 -> FETCH_HEAD Submodule path 'proxmox-datacenter-manager': checked out 'cbd7d41f4ecba9d94c99cbca32235d328976b418' Submodule 'proxmox-api-types' (git://git.proxmox.com/git/proxmox-api-types.git) registered for path 'proxmox-datacenter-manager/lib/proxmox-api-types' Submodule 'ui/pwt-assets' (git://git.proxmox.com/git/ui/proxmox-yew-widget-toolkit-assets.git) registered for path 'proxmox-datacenter-manager/ui/pwt-assets' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-datacenter-manager/lib/proxmox-api-types'... remote: Enumerating objects: 30, done. remote: Counting objects: 100% (30/30), done. remote: Compressing objects: 100% (27/27), done. remote: Total 30 (delta 0), reused 22 (delta 0), pack-reused 0 Receiving objects: 100% (30/30), 73.64 KiB | 3.20 MiB/s, done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-datacenter-manager/ui/pwt-assets'... remote: Enumerating objects: 84, done. remote: Counting objects: 100% (84/84), done. remote: Compressing objects: 100% (79/79), done. remote: Total 84 (delta 6), reused 56 (delta 4), pack-reused 0 Receiving objects: 100% (84/84), 1.84 MiB | 22.74 MiB/s, done. Resolving deltas: 100% (6/6), done. Submodule path 'proxmox-datacenter-manager/lib/proxmox-api-types': checked out '5161d2cfe6f981c5ebb0db5227b289bdac0984d6' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 46, done. remote: Counting objects: 100% (46/46), done. remote: Compressing objects: 100% (20/20), done. remote: Total 24 (delta 22), reused 5 (delta 4), pack-reused 0 Unpacking objects: 100% (24/24), 3.64 KiB | 1.82 MiB/s, done. From git://git.proxmox.com/git/ui/proxmox-yew-widget-toolkit-assets * branch 2e4b38cb877258a01275389be5d56cd68c021b21 -> FETCH_HEAD Submodule path 'proxmox-datacenter-manager/ui/pwt-assets': checked out '2e4b38cb877258a01275389be5d56cd68c021b21' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 9, done. remote: Counting objects: 100% (9/9), done. remote: Compressing objects: 100% (5/5), done. remote: Total 5 (delta 4), reused 0 (delta 0), pack-reused 0 Unpacking objects: 100% (5/5), 426 bytes | 426.00 KiB/s, done. From git://git.proxmox.com/git/proxmox-widget-toolkit * branch c9caf2de01fe1e5acbc1eeb62d05d84853bae61b -> FETCH_HEAD Submodule path 'proxmox-widget-toolkit': checked out 'c9caf2de01fe1e5acbc1eeb62d05d84853bae61b' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 29, done. remote: Counting objects: 100% (29/29), done. remote: Compressing objects: 100% (15/15), done. remote: Total 15 (delta 13), reused 1 (delta 0), pack-reused 0 Unpacking objects: 100% (15/15), 1.31 KiB | 671.00 KiB/s, done. From git://git.proxmox.com/git/ui/proxmox-yew-comp * branch 1a30f153bc861f3ca6a7c4c52b8092c40322474d -> FETCH_HEAD Submodule path 'proxmox-yew-comp': checked out '1a30f153bc861f3ca6a7c4c52b8092c40322474d' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 25, done. remote: Counting objects: 100% (25/25), done. remote: Compressing objects: 100% (13/13), done. remote: Total 13 (delta 11), reused 2 (delta 0), pack-reused 0 Unpacking objects: 100% (13/13), 1.58 KiB | 1.58 MiB/s, done. From git://git.proxmox.com/git/ui/proxmox-yew-widget-toolkit * branch e5f0fd91e72b5cf84c90794dc36bcc114bbda442 -> FETCH_HEAD Submodule path 'proxmox-yew-widget-toolkit': checked out 'e5f0fd91e72b5cf84c90794dc36bcc114bbda442' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 49, done. remote: Counting objects: 100% (49/49), done. remote: Compressing objects: 100% (26/26), done. remote: Total 26 (delta 22), reused 2 (delta 0), pack-reused 0 Unpacking objects: 100% (26/26), 7.16 KiB | 1.19 MiB/s, done. From git://git.proxmox.com/git/pve-manager * branch 5adfdb36ef298c98a5b8e98b4f3df06555f782a2 -> FETCH_HEAD Submodule path 'pve-manager': checked out '5adfdb36ef298c98a5b8e98b4f3df06555f782a2' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 17, done. remote: Counting objects: 100% (17/17), done. remote: Compressing objects: 100% (9/9), done. remote: Total 9 (delta 7), reused 0 (delta 0), pack-reused 0 Unpacking objects: 100% (9/9), 1.03 KiB | 1.03 MiB/s, done. From git://git.proxmox.com/git/ui/pve-yew-mobile-gui * branch 3d9283a94f137877c34d1c05243273d5077007aa -> FETCH_HEAD Submodule path 'pve-yew-mobile-gui': checked out '3d9283a94f137877c34d1c05243273d5077007aa' Submodule 'proxmox-api-types' (gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types) registered for path 'pve-yew-mobile-gui/proxmox-api-types' Submodule 'pwt-assets' (gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets) registered for path 'pve-yew-mobile-gui/pwt-assets' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed Failed to clone 'proxmox-api-types'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed Failed to clone 'pwt-assets' a second time, aborting Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed Failed to clone 'proxmox-api-types' a second time, aborting fatal: Failed to recurse into submodule path 'pve-yew-mobile-gui' Submodule path 'pmg-yew-quarantine-gui': checked out '73f6536f1f83bfa85e687c3ff878b0fd7d099025' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets' a second time, aborting fatal: Failed to recurse into submodule path 'pmg-yew-quarantine-gui' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets' a second time, aborting fatal: Failed to recurse into submodule path 'pmg-yew-quarantine-gui' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed Failed to clone 'proxmox-api-types'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed Failed to clone 'pwt-assets' a second time, aborting Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed Failed to clone 'proxmox-api-types' a second time, aborting fatal: Failed to recurse into submodule path 'pve-yew-mobile-gui' error: builder for '/nix/store/34ah38009fn22gw98s4iniq5sga86fhn-proxmox-i18n-4d30bc0.drv' failed with exit code 1; last 25 log lines: > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed > Failed to clone 'pwt-assets' a second time, aborting > fatal: Failed to recurse into submodule path 'pmg-yew-quarantine-gui' > Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... > error: cannot run ssh: No such file or directory > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed > Failed to clone 'proxmox-api-types'. Retry scheduled > Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... > error: cannot run ssh: No such file or directory > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed > Failed to clone 'pwt-assets'. Retry scheduled > Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... > error: cannot run ssh: No such file or directory > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed > Failed to clone 'pwt-assets' a second time, aborting > Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... > error: cannot run ssh: No such file or directory > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed > Failed to clone 'proxmox-api-types' a second time, aborting > fatal: Failed to recurse into submodule path 'pve-yew-mobile-gui' For full logs, run 'nix log /nix/store/34ah38009fn22gw98s4iniq5sga86fhn-proxmox-i18n-4d30bc0.drv'. update-source-version: error: Couldn't figure out new hash of 'packages.x86_64-linux.proxmox-i18n.src'! --- SHOWING ERROR LOG FOR proxmox-i18n-3.2.4 ---------------------- The update script for proxmox-i18n-3.2.4 failed with exit code 1 [result] Failed to update proxmox-i18n 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath sencha-touch, using log file: /var/log/proxmox-nixos-update/sencha-touch/2025-08-06.log sencha-touch 0 -> 1 attrpath: sencha-touch [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - sencha-touch-2.4.2 Press Enter key to continue... Running update for: - sencha-touch-2.4.2: UPDATING ... - sencha-touch-2.4.2: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update sencha-touch 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath linstor-api-py, using log file: /var/log/proxmox-nixos-update/linstor-api-py/2025-08-06.log linstor-api-py 0 -> 1 attrpath: linstor-api-py [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - python3.10-linstor-api-py-1.23.0 Press Enter key to continue... Running update for: - python3.10-linstor-api-py-1.23.0: UPDATING ... - python3.10-linstor-api-py-1.23.0: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update linstor-api-py 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath linstor-proxmox, using log file: /var/log/proxmox-nixos-update/linstor-proxmox/2025-08-06.log linstor-proxmox 0 -> 1 attrpath: linstor-proxmox [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - linstor-proxmox-8.1.1 Press Enter key to continue... Running update for: - linstor-proxmox-8.1.1: UPDATING ... - linstor-proxmox-8.1.1: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/linstor-proxmox/default.nix b/pkgs/linstor-proxmox/default.nix index e1f3abd..1ed77eb 100644 --- a/pkgs/linstor-proxmox/default.nix +++ b/pkgs/linstor-proxmox/default.nix @@ -19,13 +19,13 @@ in perl538.pkgs.toPerlModule ( stdenv.mkDerivation rec { pname = "linstor-proxmox"; - version = "8.1.1"; + version = "8.1.2"; src = fetchFromGitHub { owner = "LINBIT"; repo = "linstor-proxmox"; rev = "v${version}"; - hash = "sha256-O50dqs6XPiU58mr65h+Juj9hxalUL6UcgTcXnyCEwBY="; + hash = "sha256-z0KL+td0lyH4VS6/7zU8kMniwEJUQNnQo2EHZW/dN0Y="; }; makeFlags = [ Successfully finished processing skipping cachix Semi-automatic update generated by [nixpkgs-update](https://github.com/ryantm/nixpkgs-update) tools. This update was made based on information from passthru.updateScript. meta.description for linstor-proxmox is: Integration pluging bridging LINSTOR to Proxmox VE meta.homepage for linstor-proxmox is: https://github.com/LINBIT/linstor-proxmox meta.changelog for linstor-proxmox is: https://github.com/LINBIT/linstor-proxmox/blob/v8.1.2/CHANGELOG.md ###### Updates performed - Ran passthru.UpdateScript ###### To inspect upstream changes - [Compare changes on GitHub](https://github.com/LINBIT/linstor-proxmox/compare/v8.1.1...v8.1.2) ###### Impact Checks done --- - built on NixOS - Warning: a test defined in `passthru.tests` did not pass - found 8.1.2 with grep in /nix/store/2iz0zrr0wph458rlqq5a9ilrggzd1s5d-linstor-proxmox-8.1.2 - found 8.1.2 in filename of file in /nix/store/2iz0zrr0wph458rlqq5a9ilrggzd1s5d-linstor-proxmox-8.1.2 ---
Rebuild report (if merged into master) (click to expand) ``` 1 total rebuild path(s) 1 package rebuild(s) First fifty rebuilds by attrpath linstor-proxmox ```
Instructions to test this update (click to expand) --- Build yourself: ``` nix-build -A linstor-proxmox https://github.com/proxmox-update/nixpkgs/archive/be1352abbbea2a8fc308cc3f5075f0105660be37.tar.gz ``` Or: ``` nix build github:proxmox-update/nixpkgs/be1352abbbea2a8fc308cc3f5075f0105660be37#linstor-proxmox ``` After you've downloaded or built it, look at the files and if there are any, run the binaries: ``` ls -la /nix/store/2iz0zrr0wph458rlqq5a9ilrggzd1s5d-linstor-proxmox-8.1.2 ls -la /nix/store/2iz0zrr0wph458rlqq5a9ilrggzd1s5d-linstor-proxmox-8.1.2/bin ``` ---

### Pre-merge build results NixPkgs review skipped --- ###### Maintainer pings cc @camillemndn @JulienMalka for [testing](https://github.com/ryantm/nixpkgs-update/blob/main/doc/nixpkgs-maintainer-faq.md#r-ryantm-opened-a-pr-for-my-package-what-do-i-do). HTTPError (HttpExceptionRequest Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } (StatusCodeException (Response {responseStatus = Status {statusCode = 422, statusMessage = "Unprocessable Entity"}, responseVersion = HTTP/1.1, responseHeaders = [("Date","Wed, 06 Aug 2025 10:12:04 GMT"),("Content-Type","application/json; charset=utf-8"),("Content-Length","275"),("X-OAuth-Scopes","admin:enterprise, admin:gpg_key, admin:org, admin:org_hook, admin:public_key, admin:repo_hook, admin:ssh_signing_key, audit_log, codespace, copilot, delete:packages, delete_repo, gist, project, repo, user, workflow, write:discussion, write:packages"),("X-Accepted-OAuth-Scopes",""),("X-GitHub-Media-Type","github.v3; format=json"),("x-github-api-version-selected","2022-11-28"),("X-RateLimit-Limit","5000"),("X-RateLimit-Remaining","4996"),("X-RateLimit-Reset","1754478625"),("X-RateLimit-Used","4"),("X-RateLimit-Resource","core"),("Access-Control-Expose-Headers","ETag, Link, Location, Retry-After, X-GitHub-OTP, X-RateLimit-Limit, X-RateLimit-Remaining, X-RateLimit-Used, X-RateLimit-Resource, X-RateLimit-Reset, X-OAuth-Scopes, X-Accepted-OAuth-Scopes, X-Poll-Interval, X-GitHub-Media-Type, X-GitHub-SSO, X-GitHub-Request-Id, Deprecation, Sunset"),("Access-Control-Allow-Origin","*"),("Strict-Transport-Security","max-age=31536000; includeSubdomains; preload"),("X-Frame-Options","deny"),("X-Content-Type-Options","nosniff"),("X-XSS-Protection","0"),("Referrer-Policy","origin-when-cross-origin, strict-origin-when-cross-origin"),("Content-Security-Policy","default-src 'none'"),("Vary","Accept-Encoding, Accept, X-Requested-With"),("Server","github.com"),("X-GitHub-Request-Id","8CCA:1DB8AF:3E0A777:3AE7D51:68932A73")], responseBody = (), responseCookieJar = CJ {expose = []}, responseClose' = ResponseClose, responseOriginalRequest = Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } }) "{\"message\":\"Validation Failed\",\"errors\":[{\"resource\":\"PullRequest\",\"code\":\"custom\",\"message\":\"A pull request already exists for proxmox-update:auto-update/linstor-proxmox.\"}],\"documentation_url\":\"https://docs.github.com/rest/pulls/pulls#create-a-pull-request\",\"status\":\"422\"}")) [result] Failed to update linstor-proxmox 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath socket, using log file: /var/log/proxmox-nixos-update/socket/2025-08-06.log socket 0 -> 1 attrpath: socket [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-Socket-2.039 Press Enter key to continue... Running update for: - perl5.38.2-Socket-2.039: UPDATING ... - perl5.38.2-Socket-2.039: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/perl-modules/socket/default.nix b/pkgs/perl-modules/socket/default.nix index b5ee7c0..a11ca10 100644 --- a/pkgs/perl-modules/socket/default.nix +++ b/pkgs/perl-modules/socket/default.nix @@ -6,11 +6,11 @@ perl538.pkgs.buildPerlPackage rec { pname = "Socket"; - version = "2.039"; + version = "2.040"; src = fetchurl { url = "mirror://cpan/authors/id/P/PE/PEVANS/Socket-${version}.tar.gz"; - hash = "sha256-XcYa5uBJ5Q0QUtZWNBtgkdyfiERkp44q/cK5if9DkLs="; + hash = "sha256-vgEC/c6o1D8bAu8u+UNFrEu8e2xm7OLd0aNZPYNxuhs="; }; passthru.updateScript = [ Successfully finished processing skipping cachix Semi-automatic update generated by [nixpkgs-update](https://github.com/ryantm/nixpkgs-update) tools. This update was made based on information from passthru.updateScript. meta.description for socket is: Base32 encoder and decoder meta.homepage for socket is: https://metacpan.org/dist/Socket ###### Updates performed - Ran passthru.UpdateScript ###### To inspect upstream changes ###### Impact Checks done --- - built on NixOS - Warning: a test defined in `passthru.tests` did not pass - found 2.040 with grep in /nix/store/kzrbsy5d5zqlgjvm5jyd7q134f88mlqi-perl5.38.2-Socket-2.040 - found 2.040 in filename of file in /nix/store/kzrbsy5d5zqlgjvm5jyd7q134f88mlqi-perl5.38.2-Socket-2.040 ---
Rebuild report (if merged into master) (click to expand) ``` 1 total rebuild path(s) 1 package rebuild(s) First fifty rebuilds by attrpath socket ```
Instructions to test this update (click to expand) --- Build yourself: ``` nix-build -A socket https://github.com/proxmox-update/nixpkgs/archive/8b19cca0fe3549d4e11902d6d2550f1d98c5f1c9.tar.gz ``` Or: ``` nix build github:proxmox-update/nixpkgs/8b19cca0fe3549d4e11902d6d2550f1d98c5f1c9#socket ``` After you've downloaded or built it, look at the files and if there are any, run the binaries: ``` ls -la /nix/store/kzrbsy5d5zqlgjvm5jyd7q134f88mlqi-perl5.38.2-Socket-2.040 ls -la /nix/store/kzrbsy5d5zqlgjvm5jyd7q134f88mlqi-perl5.38.2-Socket-2.040/bin ``` ---

### Pre-merge build results NixPkgs review skipped --- ###### Maintainer pings cc @camillemndn @JulienMalka for [testing](https://github.com/ryantm/nixpkgs-update/blob/main/doc/nixpkgs-maintainer-faq.md#r-ryantm-opened-a-pr-for-my-package-what-do-i-do). HTTPError (HttpExceptionRequest Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } (StatusCodeException (Response {responseStatus = Status {statusCode = 422, statusMessage = "Unprocessable Entity"}, responseVersion = HTTP/1.1, responseHeaders = [("Date","Wed, 06 Aug 2025 10:12:28 GMT"),("Content-Type","application/json; charset=utf-8"),("Content-Length","266"),("X-OAuth-Scopes","admin:enterprise, admin:gpg_key, admin:org, admin:org_hook, admin:public_key, admin:repo_hook, admin:ssh_signing_key, audit_log, codespace, copilot, delete:packages, delete_repo, gist, project, repo, user, workflow, write:discussion, write:packages"),("X-Accepted-OAuth-Scopes",""),("X-GitHub-Media-Type","github.v3; format=json"),("x-github-api-version-selected","2022-11-28"),("X-RateLimit-Limit","5000"),("X-RateLimit-Remaining","4994"),("X-RateLimit-Reset","1754478625"),("X-RateLimit-Used","6"),("X-RateLimit-Resource","core"),("Access-Control-Expose-Headers","ETag, Link, Location, Retry-After, X-GitHub-OTP, X-RateLimit-Limit, X-RateLimit-Remaining, X-RateLimit-Used, X-RateLimit-Resource, X-RateLimit-Reset, X-OAuth-Scopes, X-Accepted-OAuth-Scopes, X-Poll-Interval, X-GitHub-Media-Type, X-GitHub-SSO, X-GitHub-Request-Id, Deprecation, Sunset"),("Access-Control-Allow-Origin","*"),("Strict-Transport-Security","max-age=31536000; includeSubdomains; preload"),("X-Frame-Options","deny"),("X-Content-Type-Options","nosniff"),("X-XSS-Protection","0"),("Referrer-Policy","origin-when-cross-origin, strict-origin-when-cross-origin"),("Content-Security-Policy","default-src 'none'"),("Vary","Accept-Encoding, Accept, X-Requested-With"),("Server","github.com"),("X-GitHub-Request-Id","D8AE:2753F0:3A6135F:374A96D:68932A8B")], responseBody = (), responseCookieJar = CJ {expose = []}, responseClose' = ResponseClose, responseOriginalRequest = Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } }) "{\"message\":\"Validation Failed\",\"errors\":[{\"resource\":\"PullRequest\",\"code\":\"custom\",\"message\":\"A pull request already exists for proxmox-update:auto-update/socket.\"}],\"documentation_url\":\"https://docs.github.com/rest/pulls/pulls#create-a-pull-request\",\"status\":\"422\"}")) [result] Failed to update socket 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath termproxy, using log file: /var/log/proxmox-nixos-update/termproxy/2025-08-06.log termproxy 0 -> 1 attrpath: termproxy [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - termproxy-1.1.0 Press Enter key to continue... Running update for: - termproxy-1.1.0: UPDATING ... - termproxy-1.1.0: ERROR --- SHOWING ERROR LOG FOR termproxy-1.1.0 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: error: unable to read sha1 file of .cargo/config.toml (7b442dcf674edccc892ea58b5346836f514003ff) error: unable to read sha1 file of .gitignore (7480d9c25769f12dd151aa17f0c318637ee0fdb3) error: unable to read sha1 file of README (1efdc521328a22bd5e36c1a45d3889f9f3d74e75) error: unable to read sha1 file of termproxy/Makefile (5622380940467a23d9f993894fe6e858c57007f2) error: unable to read sha1 file of termproxy/debian/changelog (8f426428912f1d29ecf335c9c565fef1c98cd47d) error: unable to read sha1 file of termproxy/debian/control (1a26f1c17615d0acb3c6d967dff1457fe04bd540) error: unable to read sha1 file of termproxy/debian/copyright (8249a3a7152b62690ff3634c80a04231393699bc) error: unable to read sha1 file of termproxy/debian/docs (86966720abe22e8fe2915f531bb2d0db8832e2e7) error: unable to read sha1 file of termproxy/debian/links (3846526f728aa7073e01ee9729a93e7ae4e430f0) error: unable to read sha1 file of termproxy/debian/rules (add090bcc4451bbab1340ce980776f038c20a97e) error: unable to read sha1 file of termproxy/debian/source/format (89ae9db8f88b823b6a7eabf55e203658739da122) error: unable to read sha1 file of termproxy/src/cli.rs (9a451dbcd61225e7cfcbb826eb2264fb86efe577) error: unable to read sha1 file of termproxy/src/main.rs (454adf76864f5915a5362e64d77afd78f3c566b0) error: unable to read sha1 file of termproxy/src/pty.rs (2ba7498ee3b67c2fc7ab6ebe334c1da84a060fea) error: unable to read sha1 file of xterm.js/Makefile (378be9347036152dc55f6833074283bb8ae46a42) error: unable to read sha1 file of xterm.js/debian/changelog (79c769528186ad99fd502f57a1c784210d2d046b) error: unable to read sha1 file of xterm.js/debian/control (71cf01f64790841cb396831d0d58c0fc97d96324) error: unable to read sha1 file of xterm.js/debian/copyright (669f2ebebbc16dab87f3a9fd888851a8a6349aed) error: unable to read sha1 file of xterm.js/debian/docs (86966720abe22e8fe2915f531bb2d0db8832e2e7) error: unable to read sha1 file of xterm.js/debian/install (0291a3d94cfd562a575718432124745d1413d486) error: unable to read sha1 file of xterm.js/debian/rules (55b24ac462a868fc2bb2bf1cc9e176a80160998c) error: unable to read sha1 file of xterm.js/debian/source/format (163aaf8d82b6c54f23c45f32895dbdfdcc27b047) error: unable to read sha1 file of xterm.js/debian/source/lintian-overrides (01648c190a8a920646108b40c9fd1bb4ed1f28d7) error: unable to read sha1 file of xterm.js/src/addon-fit.js (038897193db54dd0f09783d53e602755b93a2eaf) error: unable to read sha1 file of xterm.js/src/addon-fit.js.map (b4502be7d565674431bc8bc65a9f207ae6101ddb) error: unable to read sha1 file of xterm.js/src/addon-webgl.js (8c4a2adc0e23472c56767e8af5536d0c4b17d3cb) error: unable to read sha1 file of xterm.js/src/addon-webgl.js.map (471f31b570ff5eb55fecbc1715299d7d9370e314) error: unable to read sha1 file of xterm.js/src/index.html.hbs.in (9857e9de7119948cf1193813e8ddf39b8805602b) error: unable to read sha1 file of xterm.js/src/index.html.tpl.in (0084158d89f56f7d7c540d122d90f2f9b4909915) error: unable to read sha1 file of xterm.js/src/main.js (902a1c37c67c88c360e9ef24e7a0258561947b04) error: unable to read sha1 file of xterm.js/src/style.css (04db7d5da777e09263dea0cbc5b52bf6d76251d1) error: unable to read sha1 file of xterm.js/src/util.js (52cad215616c4f6d107469c2c1584ab3ec05cccb) error: unable to read sha1 file of xterm.js/src/xterm.css (e97b6439055da076119d8ce42225944623b80e9b) error: unable to read sha1 file of xterm.js/src/xterm.js (7ca75f8e5ec2a0741333130fd63fb9c79d9c2023) error: unable to read sha1 file of xterm.js/src/xterm.js.map (ef37aec9487a1449579a8186db08ffab5a09f556) fatal: Could not reset index file to revision '@{u}'. --- SHOWING ERROR LOG FOR termproxy-1.1.0 ---------------------- The update script for termproxy-1.1.0 failed with exit code 1 [result] Failed to update termproxy 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-container, using log file: /var/log/proxmox-nixos-update/pve-container/2025-08-06.log pve-container 0 -> 1 attrpath: pve-container [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-container-5.2.6 Press Enter key to continue... Running update for: - pve-container-5.2.6: UPDATING ... - pve-container-5.2.6: ERROR --- SHOWING ERROR LOG FOR pve-container-5.2.6 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-container/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-container/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-container/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: pack has 2 unresolved deltas fatal: fetch-pack: invalid index-pack output --- SHOWING ERROR LOG FOR pve-container-5.2.6 ---------------------- The update script for pve-container-5.2.6 failed with exit code 1 [result] Failed to update pve-container 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath proxmox-widget-toolkit, using log file: /var/log/proxmox-nixos-update/proxmox-widget-toolkit/2025-08-06.log proxmox-widget-toolkit 0 -> 1 attrpath: proxmox-widget-toolkit [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - proxmox-widget-toolkit-4.3.3 Press Enter key to continue... Running update for: - proxmox-widget-toolkit-4.3.3: UPDATING ... - proxmox-widget-toolkit-4.3.3: ERROR --- SHOWING ERROR LOG FOR proxmox-widget-toolkit-4.3.3 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-widget-toolkit/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-widget-toolkit/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-widget-toolkit/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: error: Could not read 9bea06359a284c5f0a398f70f40c2f410de9ce08 error: Could not read dc5d616d72e41b805155165aeb1c81c7fe7d058c fatal: missing blob object 'ffb6c2c06f2a4aac7899896e1a1f76f8929852c0' error: git://git.proxmox.com/git/proxmox-widget-toolkit.git did not send all necessary objects --- SHOWING ERROR LOG FOR proxmox-widget-toolkit-4.3.3 ---------------------- The update script for proxmox-widget-toolkit-4.3.3 failed with exit code 1 [result] Failed to update proxmox-widget-toolkit 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-rados2, using log file: /var/log/proxmox-nixos-update/pve-rados2/2025-08-06.log pve-rados2 0 -> 1 attrpath: pve-rados2 [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - pve-rados2-1.4.1 Press Enter key to continue... Running update for: - pve-rados2-1.4.1: UPDATING ... - pve-rados2-1.4.1: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/pve-rados2/default.nix b/pkgs/pve-rados2/default.nix index d0d270e..b2dfb5d 100644 --- a/pkgs/pve-rados2/default.nix +++ b/pkgs/pve-rados2/default.nix @@ -9,12 +9,12 @@ perl538.pkgs.toPerlModule ( stdenv.mkDerivation rec { pname = "pve-rados2"; - version = "1.4.1"; + version = "1.5.0"; src = fetchgit { url = "git://git.proxmox.com/git/librados2-perl.git"; - rev = "b2017399cac82628e15ec14e95551c14fdfbf14f"; - hash = "sha256-rHBM4xVwxAO0ZOU9YVw/n98JBzyRDwm0sOEAOhzUARc="; + rev = "52544bb3b69bad74b4caf29698bb9ceb9a7bb6e0"; + hash = "sha256-CcURv6KrfdyzRq9ccOXita05QHJ9AdvZTTxPRWpO0k0="; }; postPatch = '' Successfully finished processing skipping cachix Semi-automatic update generated by [nixpkgs-update](https://github.com/ryantm/nixpkgs-update) tools. This update was made based on information from passthru.updateScript. meta.description for pve-rados2 is: Perl bindings for librados meta.homepage for pve-rados2 is: git://git.proxmox.com/?p=librados2-perl.git ###### Updates performed - Ran passthru.UpdateScript ###### To inspect upstream changes ###### Impact Checks done --- - built on NixOS - Warning: a test defined in `passthru.tests` did not pass - found 1.5.0 in filename of file in /nix/store/lg6bif6qsvpi6sbq3r5g9hdh9ksjj8y7-pve-rados2-1.5.0 ---
Rebuild report (if merged into master) (click to expand) ``` 1 total rebuild path(s) 1 package rebuild(s) First fifty rebuilds by attrpath pve-rados2 ```
Instructions to test this update (click to expand) --- Build yourself: ``` nix-build -A pve-rados2 https://github.com/proxmox-update/nixpkgs/archive/c2916822781a5876b51e94bcd3a3784ecaafa992.tar.gz ``` Or: ``` nix build github:proxmox-update/nixpkgs/c2916822781a5876b51e94bcd3a3784ecaafa992#pve-rados2 ``` After you've downloaded or built it, look at the files and if there are any, run the binaries: ``` ls -la /nix/store/lg6bif6qsvpi6sbq3r5g9hdh9ksjj8y7-pve-rados2-1.5.0 ls -la /nix/store/lg6bif6qsvpi6sbq3r5g9hdh9ksjj8y7-pve-rados2-1.5.0/bin ``` ---

### Pre-merge build results NixPkgs review skipped --- ###### Maintainer pings cc @camillemndn @JulienMalka for [testing](https://github.com/ryantm/nixpkgs-update/blob/main/doc/nixpkgs-maintainer-faq.md#r-ryantm-opened-a-pr-for-my-package-what-do-i-do). HTTPError (HttpExceptionRequest Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } (StatusCodeException (Response {responseStatus = Status {statusCode = 422, statusMessage = "Unprocessable Entity"}, responseVersion = HTTP/1.1, responseHeaders = [("Date","Wed, 06 Aug 2025 10:13:21 GMT"),("Content-Type","application/json; charset=utf-8"),("Content-Length","270"),("X-OAuth-Scopes","admin:enterprise, admin:gpg_key, admin:org, admin:org_hook, admin:public_key, admin:repo_hook, admin:ssh_signing_key, audit_log, codespace, copilot, delete:packages, delete_repo, gist, project, repo, user, workflow, write:discussion, write:packages"),("X-Accepted-OAuth-Scopes",""),("X-GitHub-Media-Type","github.v3; format=json"),("x-github-api-version-selected","2022-11-28"),("X-RateLimit-Limit","5000"),("X-RateLimit-Remaining","4992"),("X-RateLimit-Reset","1754478625"),("X-RateLimit-Used","8"),("X-RateLimit-Resource","core"),("Access-Control-Expose-Headers","ETag, Link, Location, Retry-After, X-GitHub-OTP, X-RateLimit-Limit, X-RateLimit-Remaining, X-RateLimit-Used, X-RateLimit-Resource, X-RateLimit-Reset, X-OAuth-Scopes, X-Accepted-OAuth-Scopes, X-Poll-Interval, X-GitHub-Media-Type, X-GitHub-SSO, X-GitHub-Request-Id, Deprecation, Sunset"),("Access-Control-Allow-Origin","*"),("Strict-Transport-Security","max-age=31536000; includeSubdomains; preload"),("X-Frame-Options","deny"),("X-Content-Type-Options","nosniff"),("X-XSS-Protection","0"),("Referrer-Policy","origin-when-cross-origin, strict-origin-when-cross-origin"),("Content-Security-Policy","default-src 'none'"),("Vary","Accept-Encoding, Accept, X-Requested-With"),("Server","github.com"),("X-GitHub-Request-Id","D8E2:1BB19E:3A17D12:36E7BFA:68932AC1")], responseBody = (), responseCookieJar = CJ {expose = []}, responseClose' = ResponseClose, responseOriginalRequest = Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } }) "{\"message\":\"Validation Failed\",\"errors\":[{\"resource\":\"PullRequest\",\"code\":\"custom\",\"message\":\"A pull request already exists for proxmox-update:auto-update/pve-rados2.\"}],\"documentation_url\":\"https://docs.github.com/rest/pulls/pulls#create-a-pull-request\",\"status\":\"422\"}")) [result] Failed to update pve-rados2 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath linstor-client, using log file: /var/log/proxmox-nixos-update/linstor-client/2025-08-06.log linstor-client 0 -> 1 attrpath: linstor-client [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - linstor-client-1.23.0 Press Enter key to continue... Running update for: - linstor-client-1.23.0: UPDATING ... - linstor-client-1.23.0: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/linstor-client/default.nix b/pkgs/linstor-client/default.nix index 4384759..9342f9b 100644 --- a/pkgs/linstor-client/default.nix +++ b/pkgs/linstor-client/default.nix @@ -8,14 +8,14 @@ python310.pkgs.buildPythonApplication rec { pname = "linstor-client"; - version = "1.23.0"; + version = "1.25.4"; pyproject = true; src = fetchFromGitHub { owner = "LINBIT"; repo = "linstor-client"; rev = "v${version}"; - hash = "sha256-DxYtqJr8ZOlwQdX4s4UF1BnzQsJQaYQOYOupbN3kD5k="; + hash = "sha256-sCNYJCuXAonRXk4ItRvUs3was+WjiDy82nHUk3JSb0U="; }; nativeBuildInputs = [ Received ExitFailure 1 when running Raw command: /nix/store/03a4f9rij2z4mmwprlbip3mrnnfaw0yd-nix-2.18.2/bin/nix-build --option sandbox true --arg config "{ allowBroken = true; allowUnfree = true; allowAliases = false; }" --arg overlays "[ ]" -A packages.x86_64-linux.linstor-client Received ExitFailure 1 when running Raw command: /nix/store/03a4f9rij2z4mmwprlbip3mrnnfaw0yd-nix-2.18.2/bin/nix --extra-experimental-features nix-command log -f . linstor-client Standard output: warning: Git tree '/var/cache/proxmox-nixos-update/worker/worktree/linstor-client' is dirty error: attribute 'linstor-client' in selection path 'linstor-client' not found [result] Failed to update linstor-client 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-manager, using log file: /var/log/proxmox-nixos-update/pve-manager/2025-08-06.log pve-manager 0 -> 1 attrpath: pve-manager [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-manager-8.3.5 Press Enter key to continue... Running update for: - pve-manager-8.3.5: UPDATING ... - pve-manager-8.3.5: ERROR --- SHOWING ERROR LOG FOR pve-manager-8.3.5 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-manager/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-manager/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-manager/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: pack has 3 unresolved deltas fatal: fetch-pack: invalid index-pack output --- SHOWING ERROR LOG FOR pve-manager-8.3.5 ---------------------- The update script for pve-manager-8.3.5 failed with exit code 1 [result] Failed to update pve-manager 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath iosocketip, using log file: /var/log/proxmox-nixos-update/iosocketip/2025-08-06.log iosocketip 0 -> 1 attrpath: iosocketip [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-IOSocketIP-0.42 Press Enter key to continue... Running update for: - perl5.38.2-IOSocketIP-0.42: UPDATING ... - perl5.38.2-IOSocketIP-0.42: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/perl-modules/iosocketip/default.nix b/pkgs/perl-modules/iosocketip/default.nix index 4ca37c7..38f84a2 100644 --- a/pkgs/perl-modules/iosocketip/default.nix +++ b/pkgs/perl-modules/iosocketip/default.nix @@ -6,11 +6,11 @@ perl538.pkgs.buildPerlModule rec { pname = "IOSocketIP"; - version = "0.42"; + version = "0.43"; src = fetchurl { url = "mirror://cpan/authors/id/P/PE/PEVANS/IO-Socket-IP-${version}.tar.gz"; - hash = "sha256-+Xo4RsUKTgZYzhciznzCrK2UcucEeL++nHlPsdtqaxM="; + hash = "sha256-6/Yhf0j1N66aeBJvDstLqj1IIOPiYVPOJQ87/9BfbQs="; }; passthru.updateScript = [ Received ExitFailure 1 when running Raw command: /nix/store/03a4f9rij2z4mmwprlbip3mrnnfaw0yd-nix-2.18.2/bin/nix-build --option sandbox true --arg config "{ allowBroken = true; allowUnfree = true; allowAliases = false; }" --arg overlays "[ ]" -A packages.x86_64-linux.iosocketip Received ExitFailure 1 when running Raw command: /nix/store/03a4f9rij2z4mmwprlbip3mrnnfaw0yd-nix-2.18.2/bin/nix --extra-experimental-features nix-command log -f . iosocketip Standard output: warning: Git tree '/var/cache/proxmox-nixos-update/worker/worktree/iosocketip' is dirty error: attribute 'iosocketip' in selection path 'iosocketip' not found [result] Failed to update iosocketip 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath nixmoxer, using log file: /var/log/proxmox-nixos-update/nixmoxer/2025-08-06.log nixmoxer 0 -> 1 attrpath: nixmoxer [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - nixmoxer-1.0.0 Press Enter key to continue... Running update for: - nixmoxer-1.0.0: UPDATING ... - nixmoxer-1.0.0: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update nixmoxer 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-docs, using log file: /var/log/proxmox-nixos-update/pve-docs/2025-08-06.log pve-docs 0 -> 1 attrpath: pve-docs [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-docs-8.3.1 Press Enter key to continue... Running update for: - pve-docs-8.3.1: UPDATING ... - pve-docs-8.3.1: ERROR --- SHOWING ERROR LOG FOR pve-docs-8.3.1 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: pack has 4 unresolved deltas fatal: fetch-pack: invalid index-pack output --- SHOWING ERROR LOG FOR pve-docs-8.3.1 ---------------------- The update script for pve-docs-8.3.1 failed with exit code 1 [result] Failed to update pve-docs 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-access-control, using log file: /var/log/proxmox-nixos-update/pve-access-control/2025-08-06.log pve-access-control 0 -> 1 attrpath: pve-access-control [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-access-control-8.2.2 Press Enter key to continue... Running update for: - pve-access-control-8.2.2: UPDATING ... - pve-access-control-8.2.2: ERROR --- SHOWING ERROR LOG FOR pve-access-control-8.2.2 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-access-control/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-access-control/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-access-control/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: error: unable to read sha1 file of debian/control (f15a7a4fc936b01468ceac97280044e63899ae48) error: unable to read sha1 file of src/PVE/API2/AccessControl.pm (457a0a6616b0aaa8afa02b052cd2452722796b62) error: unable to read sha1 file of src/PVE/API2/TFA.pm (ddcf1774b6145c7f3a2e16e1a21e83c4d32aba22) fatal: Could not reset index file to revision '@{u}'. --- SHOWING ERROR LOG FOR pve-access-control-8.2.2 ---------------------- The update script for pve-access-control-8.2.2 failed with exit code 1 [result] Failed to update pve-access-control 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath markedjs, using log file: /var/log/proxmox-nixos-update/markedjs/2025-08-06.log markedjs 0 -> 1 attrpath: markedjs [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - markedjs-15.0.12 Press Enter key to continue... Running update for: - markedjs-15.0.12: UPDATING ... - markedjs-15.0.12: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/markedjs/default.nix b/pkgs/markedjs/default.nix index 1490ad4..0d9ab4b 100644 --- a/pkgs/markedjs/default.nix +++ b/pkgs/markedjs/default.nix @@ -7,16 +7,16 @@ buildNpmPackage rec { pname = "markedjs"; - version = "15.0.12"; + version = "16.1.2"; src = fetchFromGitHub { owner = "markedjs"; repo = "marked"; rev = "v${version}"; - hash = "sha256-GwKL1EsxiYijPAMNM9bO0RQ/aQBcQSUlOy6O73igH6U="; + hash = "sha256-RmeLGIZSgMRfwBKbWblGUA/k0w4I3CYARIt2qW6m+Qw="; }; - npmDepsHash = "sha256-tUE8GWlwXmHpCeWyI0ipvSO2PvJ2YB0uCX7gugzscF0="; + npmDepsHash = "sha256-7lO4bZ2ajCg0n3e3+2IYjYYAVC5ToSFuJ79U4/LvJzM="; passthru.updateScript = nix-update-script { extraArgs = [ "--flake" ]; }; Successfully finished processing skipping cachix Semi-automatic update generated by [nixpkgs-update](https://github.com/ryantm/nixpkgs-update) tools. This update was made based on information from passthru.updateScript. meta.description for markedjs is: A markdown parser and compiler. Built for speed meta.homepage for markedjs is: https://marked.js.org/ ###### Updates performed - Ran passthru.UpdateScript ###### To inspect upstream changes - [Release on GitHub](https://github.com/markedjs/marked/releases/tag/v16.1.2) - [Compare changes on GitHub](https://github.com/markedjs/marked/compare/v15.0.12...v16.1.2) ###### Impact Checks done --- - built on NixOS - Warning: a test defined in `passthru.tests` did not pass - found 16.1.2 with grep in /nix/store/4hmdigabxj0y5014wzrdxabkz087zik5-markedjs-16.1.2 - found 16.1.2 in filename of file in /nix/store/4hmdigabxj0y5014wzrdxabkz087zik5-markedjs-16.1.2 ---
Rebuild report (if merged into master) (click to expand) ``` 1 total rebuild path(s) 1 package rebuild(s) First fifty rebuilds by attrpath markedjs ```
Instructions to test this update (click to expand) --- Build yourself: ``` nix-build -A markedjs https://github.com/proxmox-update/nixpkgs/archive/e1a9d105d64ad1ec797e7a0d99f5937ce96c4f28.tar.gz ``` Or: ``` nix build github:proxmox-update/nixpkgs/e1a9d105d64ad1ec797e7a0d99f5937ce96c4f28#markedjs ``` After you've downloaded or built it, look at the files and if there are any, run the binaries: ``` ls -la /nix/store/4hmdigabxj0y5014wzrdxabkz087zik5-markedjs-16.1.2 ls -la /nix/store/4hmdigabxj0y5014wzrdxabkz087zik5-markedjs-16.1.2/bin ``` ---

### Pre-merge build results NixPkgs review skipped --- ###### Maintainer pings cc @camillemndn @JulienMalka for [testing](https://github.com/ryantm/nixpkgs-update/blob/main/doc/nixpkgs-maintainer-faq.md#r-ryantm-opened-a-pr-for-my-package-what-do-i-do). HTTPError (HttpExceptionRequest Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } (StatusCodeException (Response {responseStatus = Status {statusCode = 422, statusMessage = "Unprocessable Entity"}, responseVersion = HTTP/1.1, responseHeaders = [("Date","Wed, 06 Aug 2025 10:15:00 GMT"),("Content-Type","application/json; charset=utf-8"),("Content-Length","268"),("X-OAuth-Scopes","admin:enterprise, admin:gpg_key, admin:org, admin:org_hook, admin:public_key, admin:repo_hook, admin:ssh_signing_key, audit_log, codespace, copilot, delete:packages, delete_repo, gist, project, repo, user, workflow, write:discussion, write:packages"),("X-Accepted-OAuth-Scopes",""),("X-GitHub-Media-Type","github.v3; format=json"),("x-github-api-version-selected","2022-11-28"),("X-RateLimit-Limit","5000"),("X-RateLimit-Remaining","4989"),("X-RateLimit-Reset","1754478625"),("X-RateLimit-Used","11"),("X-RateLimit-Resource","core"),("Access-Control-Expose-Headers","ETag, Link, Location, Retry-After, X-GitHub-OTP, X-RateLimit-Limit, X-RateLimit-Remaining, X-RateLimit-Used, X-RateLimit-Resource, X-RateLimit-Reset, X-OAuth-Scopes, X-Accepted-OAuth-Scopes, X-Poll-Interval, X-GitHub-Media-Type, X-GitHub-SSO, X-GitHub-Request-Id, Deprecation, Sunset"),("Access-Control-Allow-Origin","*"),("Strict-Transport-Security","max-age=31536000; includeSubdomains; preload"),("X-Frame-Options","deny"),("X-Content-Type-Options","nosniff"),("X-XSS-Protection","0"),("Referrer-Policy","origin-when-cross-origin, strict-origin-when-cross-origin"),("Content-Security-Policy","default-src 'none'"),("Vary","Accept-Encoding, Accept, X-Requested-With"),("Server","github.com"),("X-GitHub-Request-Id","CF94:12AEA:3CADDAF:396509C:68932B23")], responseBody = (), responseCookieJar = CJ {expose = []}, responseClose' = ResponseClose, responseOriginalRequest = Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } }) "{\"message\":\"Validation Failed\",\"errors\":[{\"resource\":\"PullRequest\",\"code\":\"custom\",\"message\":\"A pull request already exists for proxmox-update:auto-update/markedjs.\"}],\"documentation_url\":\"https://docs.github.com/rest/pulls/pulls#create-a-pull-request\",\"status\":\"422\"}")) [result] Failed to update markedjs 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath termreadline, using log file: /var/log/proxmox-nixos-update/termreadline/2025-08-06.log termreadline 0 -> 1 attrpath: termreadline [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-TermReadLine-1.14 Press Enter key to continue... Running update for: - perl5.38.2-TermReadLine-1.14: UPDATING ... - perl5.38.2-TermReadLine-1.14: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update termreadline 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-http-server, using log file: /var/log/proxmox-nixos-update/pve-http-server/2025-08-06.log pve-http-server 0 -> 1 attrpath: pve-http-server [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-http-server-5.2.2 Press Enter key to continue... Running update for: - pve-http-server-5.2.2: UPDATING ... - pve-http-server-5.2.2: ERROR --- SHOWING ERROR LOG FOR pve-http-server-5.2.2 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: missing blob object '4ce036829b0a9d15a6d8d6c2211e2057ecd5ba3e' error: git://git.proxmox.com/git/pve-http-server.git did not send all necessary objects --- SHOWING ERROR LOG FOR pve-http-server-5.2.2 ---------------------- The update script for pve-http-server-5.2.2 failed with exit code 1 [result] Failed to update pve-http-server 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-cluster, using log file: /var/log/proxmox-nixos-update/pve-cluster/2025-08-06.log pve-cluster 0 -> 1 attrpath: pve-cluster [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-cluster-8.0.10 Press Enter key to continue... Running update for: - pve-cluster-8.0.10: UPDATING ... - pve-cluster-8.0.10: ERROR --- SHOWING ERROR LOG FOR pve-cluster-8.0.10 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: missing blob object 'aa4da96f5d74077b17e52601b65d090ee31a5ca1' error: git://git.proxmox.com/git/pve-cluster.git did not send all necessary objects --- SHOWING ERROR LOG FOR pve-cluster-8.0.10 ---------------------- The update script for pve-cluster-8.0.10 failed with exit code 1 [result] Failed to update pve-cluster 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-edk2-firmware, using log file: /var/log/proxmox-nixos-update/pve-edk2-firmware/2025-08-06.log pve-edk2-firmware 0 -> 1 attrpath: pve-edk2-firmware [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-edk2-firmware-4.2025.02-3 Press Enter key to continue... Running update for: - pve-edk2-firmware-4.2025.02-3: UPDATING ... - pve-edk2-firmware-4.2025.02-3: ERROR --- SHOWING ERROR LOG FOR pve-edk2-firmware-4.2025.02-3 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-edk2-firmware/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-edk2-firmware/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-edk2-firmware/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: error: unable to read sha1 file of debian/changelog (97e21ee780975a84f289d1b421c9326bc98ea988) error: unable to read sha1 file of debian/control (632cea53bd2164a31f1f19f4bf04b628d0905b09) error: unable to read sha1 file of debian/edk2-vars-generator.py (351e556211005601e03fb76229bcc4ec54678c62) error: unable to read sha1 file of debian/patches/UefiCpuPkg-MpInitLib-Fix-split-lock-violation-from-M.patch (e68278add26aaab1dde4175bc04053ee6160d3f0) error: unable to read sha1 file of debian/patches/series (f9e35827ae0cb277592012b3045171e5edd268d7) error: unable to read sha1 file of debian/python/UEFI/Qemu.py (5e1ee874197064945385dea48eab9cbd88a76642) error: unable to read sha1 file of debian/rules (494f162e304dc27b6afc8441cf40e84d804946a0) fatal: Could not reset index file to revision '@{u}'. --- SHOWING ERROR LOG FOR pve-edk2-firmware-4.2025.02-3 ---------------------- The update script for pve-edk2-firmware-4.2025.02-3 failed with exit code 1 [result] Failed to update pve-edk2-firmware 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath findbin, using log file: /var/log/proxmox-nixos-update/findbin/2025-08-06.log findbin 0 -> 1 attrpath: findbin [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-FindBin-1.54 Press Enter key to continue... Running update for: - perl5.38.2-FindBin-1.54: UPDATING ... - perl5.38.2-FindBin-1.54: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update findbin 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath proxmox-i18n, using log file: /var/log/proxmox-nixos-update/proxmox-i18n/2025-08-06.log proxmox-i18n 0 -> 1 attrpath: proxmox-i18n [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - proxmox-i18n-3.2.4 Press Enter key to continue... Running update for: - proxmox-i18n-3.2.4: UPDATING ... - proxmox-i18n-3.2.4: ERROR --- SHOWING ERROR LOG FOR proxmox-i18n-3.2.4 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-i18n/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-i18n/pkgs/update.py", line 153, in main run_command(f'update-source-version {pkg_name} {version} --rev={rev}') File "/var/cache/proxmox-nixos-update/worker/worktree/proxmox-i18n/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'update-source-version proxmox-i18n 3.5.3 --rev=4d30bc02837f08d2af81b23340da4f2224ed6c86' failed with error: error: attribute 'proxmox-i18n' in selection path 'proxmox-i18n.name' not found warning: Git tree '/var/cache/proxmox-nixos-update/worker/worktree/proxmox-i18n' is dirty this derivation will be built: /nix/store/34ah38009fn22gw98s4iniq5sga86fhn-proxmox-i18n-4d30bc0.drv building '/nix/store/34ah38009fn22gw98s4iniq5sga86fhn-proxmox-i18n-4d30bc0.drv'... exporting git://git.proxmox.com/git/proxmox-i18n.git (rev 4d30bc02837f08d2af81b23340da4f2224ed6c86) into /nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0 Initialized empty Git repository in /nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/.git/ remote: Enumerating objects: 58, done. remote: Counting objects: 100% (58/58), done. remote: Compressing objects: 100% (50/50), done. remote: Total 58 (delta 28), reused 14 (delta 0), pack-reused 0 Unpacking objects: 100% (58/58), 1.54 MiB | 3.56 MiB/s, done. From git://git.proxmox.com/git/proxmox-i18n * branch 4d30bc02837f08d2af81b23340da4f2224ed6c86 -> FETCH_HEAD Switched to a new branch 'fetchgit' Submodule 'pmg-gui' (git://git.proxmox.com/git/pmg-gui) registered for path 'pmg-gui' Submodule 'pmg-yew-quarantine-gui' (git://git.proxmox.com/git/ui/pmg-yew-quarantine-gui.git) registered for path 'pmg-yew-quarantine-gui' Submodule 'proxmox-backup' (git://git.proxmox.com/git/proxmox-backup) registered for path 'proxmox-backup' Submodule 'proxmox-datacenter-manager' (git://git.proxmox.com/git/proxmox-datacenter-manager) registered for path 'proxmox-datacenter-manager' Submodule 'proxmox-widget-toolkit' (git://git.proxmox.com/git/proxmox-widget-toolkit) registered for path 'proxmox-widget-toolkit' Submodule 'proxmox-yew-comp' (git://git.proxmox.com/git/ui/proxmox-yew-comp.git) registered for path 'proxmox-yew-comp' Submodule 'proxmox-yew-widget-toolkit' (git://git.proxmox.com/git/ui/proxmox-yew-widget-toolkit.git) registered for path 'proxmox-yew-widget-toolkit' Submodule 'pve-manager' (git://git.proxmox.com/git/pve-manager) registered for path 'pve-manager' Submodule 'pve-yew-mobile-gui' (git://git.proxmox.com/git/ui/pve-yew-mobile-gui.git) registered for path 'pve-yew-mobile-gui' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-gui'... remote: Enumerating objects: 139, done. remote: Counting objects: 100% (139/139), done. remote: Compressing objects: 100% (124/124), done. remote: Total 139 (delta 15), reused 114 (delta 12), pack-reused 0 Receiving objects: 100% (139/139), 152.69 KiB | 38.17 MiB/s, done. Resolving deltas: 100% (15/15), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-widget-toolkit'... remote: Enumerating objects: 190, done. remote: Counting objects: 100% (190/190), done. remote: Compressing objects: 100% (176/176), done. remote: Total 190 (delta 11), reused 127 (delta 7), pack-reused 0 Receiving objects: 100% (190/190), 228.89 KiB | 6.36 MiB/s, done. Resolving deltas: 100% (11/11), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-datacenter-manager'... remote: Enumerating objects: 263, done. remote: Counting objects: 100% (263/263), done. remote: Compressing objects: 100% (239/239), done. remote: Total 263 (delta 21), reused 165 (delta 8), pack-reused 0 Receiving objects: 100% (263/263), 309.56 KiB | 7.94 MiB/s, done. Resolving deltas: 100% (21/21), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-yew-comp'... remote: Enumerating objects: 108, done. remote: Counting objects: 100% (108/108), done. remote: Compressing objects: 100% (104/104), done. remote: Total 108 (delta 15), reused 31 (delta 1), pack-reused 0 Receiving objects: 100% (108/108), 185.98 KiB | 4.65 MiB/s, done. Resolving deltas: 100% (15/15), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-yew-widget-toolkit'... remote: Enumerating objects: 244, done. remote: Counting objects: 100% (244/244), done. remote: Compressing objects: 100% (234/234), done. remote: Total 244 (delta 17), reused 100 (delta 8), pack-reused 0 Receiving objects: 100% (244/244), 338.81 KiB | 6.78 MiB/s, done. Resolving deltas: 100% (17/17), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui'... remote: Enumerating objects: 77, done. remote: Counting objects: 100% (77/77), done. remote: Compressing objects: 100% (68/68), done. remote: Total 77 (delta 17), reused 36 (delta 5), pack-reused 0 Receiving objects: 100% (77/77), 256.26 KiB | 6.25 MiB/s, done. Resolving deltas: 100% (17/17), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-backup'... remote: Enumerating objects: 923, done. remote: Counting objects: 100% (923/923), done. remote: Compressing objects: 100% (823/823), done. remote: Total 923 (delta 105), reused 526 (delta 63), pack-reused 0 Receiving objects: 100% (923/923), 5.17 MiB | 11.64 MiB/s, done. Resolving deltas: 100% (105/105), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui'... remote: Enumerating objects: 31, done. remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 100% (26/26), done. remote: Total 31 (delta 1), reused 18 (delta 1), pack-reused 0 Receiving objects: 100% (31/31), 17.77 KiB | 17.77 MiB/s, done. Resolving deltas: 100% (1/1), done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-manager'... remote: Enumerating objects: 661, done. remote: Counting objects: 100% (661/661), done. remote: Compressing objects: 100% (583/583), done. remote: Total 661 (delta 100), reused 441 (delta 65), pack-reused 0 Receiving objects: 100% (661/661), 900.57 KiB | 45.03 MiB/s, done. Resolving deltas: 100% (100/100), done. Submodule path 'pmg-gui': checked out '220423d5555948dc791c68d4d4cd4904d1d28290' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 15, done. remote: Counting objects: 100% (15/15), done. remote: Compressing objects: 100% (8/8), done. remote: Total 8 (delta 6), reused 2 (delta 0), pack-reused 0 Unpacking objects: 100% (8/8), 1.08 KiB | 1.08 MiB/s, done. From git://git.proxmox.com/git/ui/pmg-yew-quarantine-gui * branch 73f6536f1f83bfa85e687c3ff878b0fd7d099025 -> FETCH_HEAD Submodule path 'pmg-yew-quarantine-gui': checked out '73f6536f1f83bfa85e687c3ff878b0fd7d099025' Submodule 'pwt-assets' (gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets) registered for path 'pmg-yew-quarantine-gui/pwt-assets' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets' a second time, aborting fatal: Failed to recurse into submodule path 'pmg-yew-quarantine-gui' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 121, done. remote: Counting objects: 100% (121/121), done. remote: Compressing objects: 100% (66/66), done. remote: Total 66 (delta 52), reused 7 (delta 0), pack-reused 0 Unpacking objects: 100% (66/66), 28.80 KiB | 1.80 MiB/s, done. From git://git.proxmox.com/git/proxmox-backup * branch f86dc92503f0861596f12ad038cd999d1daf5c5f -> FETCH_HEAD Submodule path 'proxmox-backup': checked out 'f86dc92503f0861596f12ad038cd999d1daf5c5f' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 58, done. remote: Counting objects: 100% (58/58), done. remote: Compressing objects: 100% (30/30), done. remote: Total 30 (delta 25), reused 5 (delta 0), pack-reused 0 Unpacking objects: 100% (30/30), 5.77 KiB | 1.92 MiB/s, done. From git://git.proxmox.com/git/proxmox-datacenter-manager * branch cbd7d41f4ecba9d94c99cbca32235d328976b418 -> FETCH_HEAD Submodule path 'proxmox-datacenter-manager': checked out 'cbd7d41f4ecba9d94c99cbca32235d328976b418' Submodule 'proxmox-api-types' (git://git.proxmox.com/git/proxmox-api-types.git) registered for path 'proxmox-datacenter-manager/lib/proxmox-api-types' Submodule 'ui/pwt-assets' (git://git.proxmox.com/git/ui/proxmox-yew-widget-toolkit-assets.git) registered for path 'proxmox-datacenter-manager/ui/pwt-assets' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-datacenter-manager/lib/proxmox-api-types'... remote: Enumerating objects: 30, done. remote: Counting objects: 100% (30/30), done. remote: Compressing objects: 100% (27/27), done. remote: Total 30 (delta 0), reused 22 (delta 0), pack-reused 0 Receiving objects: 100% (30/30), 73.64 KiB | 3.35 MiB/s, done. Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/proxmox-datacenter-manager/ui/pwt-assets'... remote: Enumerating objects: 84, done. remote: Counting objects: 100% (84/84), done. remote: Compressing objects: 100% (79/79), done. remote: Total 84 (delta 6), reused 56 (delta 4), pack-reused 0 Receiving objects: 100% (84/84), 1.84 MiB | 8.86 MiB/s, done. Resolving deltas: 100% (6/6), done. Submodule path 'proxmox-datacenter-manager/lib/proxmox-api-types': checked out '5161d2cfe6f981c5ebb0db5227b289bdac0984d6' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 46, done. remote: Counting objects: 100% (46/46), done. remote: Compressing objects: 100% (20/20), done. remote: Total 24 (delta 22), reused 5 (delta 4), pack-reused 0 Unpacking objects: 100% (24/24), 3.64 KiB | 1.82 MiB/s, done. From git://git.proxmox.com/git/ui/proxmox-yew-widget-toolkit-assets * branch 2e4b38cb877258a01275389be5d56cd68c021b21 -> FETCH_HEAD Submodule path 'proxmox-datacenter-manager/ui/pwt-assets': checked out '2e4b38cb877258a01275389be5d56cd68c021b21' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 9, done. remote: Counting objects: 100% (9/9), done. remote: Compressing objects: 100% (5/5), done. remote: Total 5 (delta 4), reused 0 (delta 0), pack-reused 0 Unpacking objects: 100% (5/5), 426 bytes | 426.00 KiB/s, done. From git://git.proxmox.com/git/proxmox-widget-toolkit * branch c9caf2de01fe1e5acbc1eeb62d05d84853bae61b -> FETCH_HEAD Submodule path 'proxmox-widget-toolkit': checked out 'c9caf2de01fe1e5acbc1eeb62d05d84853bae61b' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 29, done. remote: Counting objects: 100% (29/29), done. remote: Compressing objects: 100% (15/15), done. remote: Total 15 (delta 13), reused 1 (delta 0), pack-reused 0 Unpacking objects: 100% (15/15), 1.31 KiB | 671.00 KiB/s, done. From git://git.proxmox.com/git/ui/proxmox-yew-comp * branch 1a30f153bc861f3ca6a7c4c52b8092c40322474d -> FETCH_HEAD Submodule path 'proxmox-yew-comp': checked out '1a30f153bc861f3ca6a7c4c52b8092c40322474d' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 25, done. remote: Counting objects: 100% (25/25), done. remote: Compressing objects: 100% (13/13), done. remote: Total 13 (delta 11), reused 2 (delta 0), pack-reused 0 Unpacking objects: 100% (13/13), 1.58 KiB | 1.58 MiB/s, done. From git://git.proxmox.com/git/ui/proxmox-yew-widget-toolkit * branch e5f0fd91e72b5cf84c90794dc36bcc114bbda442 -> FETCH_HEAD Submodule path 'proxmox-yew-widget-toolkit': checked out 'e5f0fd91e72b5cf84c90794dc36bcc114bbda442' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 49, done. remote: Counting objects: 100% (49/49), done. remote: Compressing objects: 100% (26/26), done. remote: Total 26 (delta 22), reused 2 (delta 0), pack-reused 0 Unpacking objects: 100% (26/26), 7.16 KiB | 1.19 MiB/s, done. From git://git.proxmox.com/git/pve-manager * branch 5adfdb36ef298c98a5b8e98b4f3df06555f782a2 -> FETCH_HEAD Submodule path 'pve-manager': checked out '5adfdb36ef298c98a5b8e98b4f3df06555f782a2' remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0 remote: Enumerating objects: 17, done. remote: Counting objects: 100% (17/17), done. remote: Compressing objects: 100% (9/9), done. remote: Total 9 (delta 7), reused 0 (delta 0), pack-reused 0 Unpacking objects: 100% (9/9), 1.03 KiB | 1.03 MiB/s, done. From git://git.proxmox.com/git/ui/pve-yew-mobile-gui * branch 3d9283a94f137877c34d1c05243273d5077007aa -> FETCH_HEAD Submodule path 'pve-yew-mobile-gui': checked out '3d9283a94f137877c34d1c05243273d5077007aa' Submodule 'proxmox-api-types' (gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types) registered for path 'pve-yew-mobile-gui/proxmox-api-types' Submodule 'pwt-assets' (gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets) registered for path 'pve-yew-mobile-gui/pwt-assets' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed Failed to clone 'proxmox-api-types'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed Failed to clone 'proxmox-api-types' a second time, aborting Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed Failed to clone 'pwt-assets' a second time, aborting fatal: Failed to recurse into submodule path 'pve-yew-mobile-gui' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed Failed to clone 'pwt-assets' a second time, aborting fatal: Failed to recurse into submodule path 'pmg-yew-quarantine-gui' Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed Failed to clone 'proxmox-api-types'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed Failed to clone 'pwt-assets'. Retry scheduled Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... error: cannot run ssh: No such file or directory fatal: unable to fork fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed Failed to clone 'proxmox-api-types' a second time, aborting fatal: Failed to recurse into submodule path 'pve-yew-mobile-gui' error: builder for '/nix/store/34ah38009fn22gw98s4iniq5sga86fhn-proxmox-i18n-4d30bc0.drv' failed with exit code 1; last 25 log lines: > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed > Failed to clone 'pwt-assets'. Retry scheduled > Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets'... > error: cannot run ssh: No such file or directory > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pmg-yew-quarantine-gui/pwt-assets' failed > Failed to clone 'pwt-assets' a second time, aborting > fatal: Failed to recurse into submodule path 'pmg-yew-quarantine-gui' > Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... > error: cannot run ssh: No such file or directory > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed > Failed to clone 'proxmox-api-types'. Retry scheduled > Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets'... > error: cannot run ssh: No such file or directory > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:yew/proxmox-yew-widget-toolkit-assets' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/pwt-assets' failed > Failed to clone 'pwt-assets'. Retry scheduled > Cloning into '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types'... > error: cannot run ssh: No such file or directory > fatal: unable to fork > fatal: clone of 'gitolite3@proxdev.maurer-it.com:/rust/proxmox-api-types' into submodule path '/nix/store/f7zpfwbkr5i66scnn283qgcdbzlqyy2v-proxmox-i18n-4d30bc0/pve-yew-mobile-gui/proxmox-api-types' failed > Failed to clone 'proxmox-api-types' a second time, aborting > fatal: Failed to recurse into submodule path 'pve-yew-mobile-gui' For full logs, run 'nix log /nix/store/34ah38009fn22gw98s4iniq5sga86fhn-proxmox-i18n-4d30bc0.drv'. update-source-version: error: Couldn't figure out new hash of 'packages.x86_64-linux.proxmox-i18n.src'! --- SHOWING ERROR LOG FOR proxmox-i18n-3.2.4 ---------------------- The update script for proxmox-i18n-3.2.4 failed with exit code 1 [result] Failed to update proxmox-i18n 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath linstor-proxmox, using log file: /var/log/proxmox-nixos-update/linstor-proxmox/2025-08-06.log linstor-proxmox 0 -> 1 attrpath: linstor-proxmox [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - linstor-proxmox-8.1.1 Press Enter key to continue... Running update for: - linstor-proxmox-8.1.1: UPDATING ... - linstor-proxmox-8.1.1: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/linstor-proxmox/default.nix b/pkgs/linstor-proxmox/default.nix index e1f3abd..c61a84a 100644 --- a/pkgs/linstor-proxmox/default.nix +++ b/pkgs/linstor-proxmox/default.nix @@ -19,13 +19,13 @@ in perl538.pkgs.toPerlModule ( stdenv.mkDerivation rec { pname = "linstor-proxmox"; - version = "8.1.1"; + version = "8.1.3"; src = fetchFromGitHub { owner = "LINBIT"; repo = "linstor-proxmox"; rev = "v${version}"; - hash = "sha256-O50dqs6XPiU58mr65h+Juj9hxalUL6UcgTcXnyCEwBY="; + hash = "sha256-edD77DlsYozs2sgLykZkFOYTLnkbG9dGgt/Q/94Jwnw="; }; makeFlags = [ Successfully finished processing skipping cachix Semi-automatic update generated by [nixpkgs-update](https://github.com/ryantm/nixpkgs-update) tools. This update was made based on information from passthru.updateScript. meta.description for linstor-proxmox is: Integration pluging bridging LINSTOR to Proxmox VE meta.homepage for linstor-proxmox is: https://github.com/LINBIT/linstor-proxmox meta.changelog for linstor-proxmox is: https://github.com/LINBIT/linstor-proxmox/blob/v8.1.3/CHANGELOG.md ###### Updates performed - Ran passthru.UpdateScript ###### To inspect upstream changes - [Compare changes on GitHub](https://github.com/LINBIT/linstor-proxmox/compare/v8.1.1...v8.1.3) ###### Impact Checks done --- - built on NixOS - Warning: a test defined in `passthru.tests` did not pass - found 8.1.3 with grep in /nix/store/1ak9a3gzvvd3m56sinm40nilc59cs6wm-linstor-proxmox-8.1.3 - found 8.1.3 in filename of file in /nix/store/1ak9a3gzvvd3m56sinm40nilc59cs6wm-linstor-proxmox-8.1.3 ---
Rebuild report (if merged into master) (click to expand) ``` 1 total rebuild path(s) 1 package rebuild(s) First fifty rebuilds by attrpath linstor-proxmox ```
Instructions to test this update (click to expand) --- Build yourself: ``` nix-build -A linstor-proxmox https://github.com/proxmox-update/nixpkgs/archive/7b01d96b38b7f477294754c3a1e11e728de25306.tar.gz ``` Or: ``` nix build github:proxmox-update/nixpkgs/7b01d96b38b7f477294754c3a1e11e728de25306#linstor-proxmox ``` After you've downloaded or built it, look at the files and if there are any, run the binaries: ``` ls -la /nix/store/1ak9a3gzvvd3m56sinm40nilc59cs6wm-linstor-proxmox-8.1.3 ls -la /nix/store/1ak9a3gzvvd3m56sinm40nilc59cs6wm-linstor-proxmox-8.1.3/bin ``` ---

### Pre-merge build results NixPkgs review skipped --- ###### Maintainer pings cc @camillemndn @JulienMalka for [testing](https://github.com/ryantm/nixpkgs-update/blob/main/doc/nixpkgs-maintainer-faq.md#r-ryantm-opened-a-pr-for-my-package-what-do-i-do). HTTPError (HttpExceptionRequest Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } (StatusCodeException (Response {responseStatus = Status {statusCode = 422, statusMessage = "Unprocessable Entity"}, responseVersion = HTTP/1.1, responseHeaders = [("Date","Wed, 06 Aug 2025 22:12:00 GMT"),("Content-Type","application/json; charset=utf-8"),("Content-Length","275"),("X-OAuth-Scopes","admin:enterprise, admin:gpg_key, admin:org, admin:org_hook, admin:public_key, admin:repo_hook, admin:ssh_signing_key, audit_log, codespace, copilot, delete:packages, delete_repo, gist, project, repo, user, workflow, write:discussion, write:packages"),("X-Accepted-OAuth-Scopes",""),("X-GitHub-Media-Type","github.v3; format=json"),("x-github-api-version-selected","2022-11-28"),("X-RateLimit-Limit","5000"),("X-RateLimit-Remaining","4996"),("X-RateLimit-Reset","1754521820"),("X-RateLimit-Used","4"),("X-RateLimit-Resource","core"),("Access-Control-Expose-Headers","ETag, Link, Location, Retry-After, X-GitHub-OTP, X-RateLimit-Limit, X-RateLimit-Remaining, X-RateLimit-Used, X-RateLimit-Resource, X-RateLimit-Reset, X-OAuth-Scopes, X-Accepted-OAuth-Scopes, X-Poll-Interval, X-GitHub-Media-Type, X-GitHub-SSO, X-GitHub-Request-Id, Deprecation, Sunset"),("Access-Control-Allow-Origin","*"),("Strict-Transport-Security","max-age=31536000; includeSubdomains; preload"),("X-Frame-Options","deny"),("X-Content-Type-Options","nosniff"),("X-XSS-Protection","0"),("Referrer-Policy","origin-when-cross-origin, strict-origin-when-cross-origin"),("Content-Security-Policy","default-src 'none'"),("Vary","Accept-Encoding, Accept, X-Requested-With"),("Server","github.com"),("X-GitHub-Request-Id","914E:24D8D2:75665D7:6E30E89:6893D32F")], responseBody = (), responseCookieJar = CJ {expose = []}, responseClose' = ResponseClose, responseOriginalRequest = Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } }) "{\"message\":\"Validation Failed\",\"errors\":[{\"resource\":\"PullRequest\",\"code\":\"custom\",\"message\":\"A pull request already exists for proxmox-update:auto-update/linstor-proxmox.\"}],\"documentation_url\":\"https://docs.github.com/rest/pulls/pulls#create-a-pull-request\",\"status\":\"422\"}")) [result] Failed to update linstor-proxmox 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath socket, using log file: /var/log/proxmox-nixos-update/socket/2025-08-06.log socket 0 -> 1 attrpath: socket [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-Socket-2.039 Press Enter key to continue... Running update for: - perl5.38.2-Socket-2.039: UPDATING ... - perl5.38.2-Socket-2.039: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/perl-modules/socket/default.nix b/pkgs/perl-modules/socket/default.nix index b5ee7c0..a11ca10 100644 --- a/pkgs/perl-modules/socket/default.nix +++ b/pkgs/perl-modules/socket/default.nix @@ -6,11 +6,11 @@ perl538.pkgs.buildPerlPackage rec { pname = "Socket"; - version = "2.039"; + version = "2.040"; src = fetchurl { url = "mirror://cpan/authors/id/P/PE/PEVANS/Socket-${version}.tar.gz"; - hash = "sha256-XcYa5uBJ5Q0QUtZWNBtgkdyfiERkp44q/cK5if9DkLs="; + hash = "sha256-vgEC/c6o1D8bAu8u+UNFrEu8e2xm7OLd0aNZPYNxuhs="; }; passthru.updateScript = [ Successfully finished processing skipping cachix Semi-automatic update generated by [nixpkgs-update](https://github.com/ryantm/nixpkgs-update) tools. This update was made based on information from passthru.updateScript. meta.description for socket is: Base32 encoder and decoder meta.homepage for socket is: https://metacpan.org/dist/Socket ###### Updates performed - Ran passthru.UpdateScript ###### To inspect upstream changes ###### Impact Checks done --- - built on NixOS - Warning: a test defined in `passthru.tests` did not pass - found 2.040 with grep in /nix/store/kzrbsy5d5zqlgjvm5jyd7q134f88mlqi-perl5.38.2-Socket-2.040 - found 2.040 in filename of file in /nix/store/kzrbsy5d5zqlgjvm5jyd7q134f88mlqi-perl5.38.2-Socket-2.040 ---
Rebuild report (if merged into master) (click to expand) ``` 1 total rebuild path(s) 1 package rebuild(s) First fifty rebuilds by attrpath socket ```
Instructions to test this update (click to expand) --- Build yourself: ``` nix-build -A socket https://github.com/proxmox-update/nixpkgs/archive/a919f6fc382c8b4c38dadf3876a9b84f9fca4d6d.tar.gz ``` Or: ``` nix build github:proxmox-update/nixpkgs/a919f6fc382c8b4c38dadf3876a9b84f9fca4d6d#socket ``` After you've downloaded or built it, look at the files and if there are any, run the binaries: ``` ls -la /nix/store/kzrbsy5d5zqlgjvm5jyd7q134f88mlqi-perl5.38.2-Socket-2.040 ls -la /nix/store/kzrbsy5d5zqlgjvm5jyd7q134f88mlqi-perl5.38.2-Socket-2.040/bin ``` ---

### Pre-merge build results NixPkgs review skipped --- ###### Maintainer pings cc @camillemndn @JulienMalka for [testing](https://github.com/ryantm/nixpkgs-update/blob/main/doc/nixpkgs-maintainer-faq.md#r-ryantm-opened-a-pr-for-my-package-what-do-i-do). HTTPError (HttpExceptionRequest Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } (StatusCodeException (Response {responseStatus = Status {statusCode = 422, statusMessage = "Unprocessable Entity"}, responseVersion = HTTP/1.1, responseHeaders = [("Date","Wed, 06 Aug 2025 22:12:24 GMT"),("Content-Type","application/json; charset=utf-8"),("Content-Length","266"),("X-OAuth-Scopes","admin:enterprise, admin:gpg_key, admin:org, admin:org_hook, admin:public_key, admin:repo_hook, admin:ssh_signing_key, audit_log, codespace, copilot, delete:packages, delete_repo, gist, project, repo, user, workflow, write:discussion, write:packages"),("X-Accepted-OAuth-Scopes",""),("X-GitHub-Media-Type","github.v3; format=json"),("x-github-api-version-selected","2022-11-28"),("X-RateLimit-Limit","5000"),("X-RateLimit-Remaining","4994"),("X-RateLimit-Reset","1754521820"),("X-RateLimit-Used","6"),("X-RateLimit-Resource","core"),("Access-Control-Expose-Headers","ETag, Link, Location, Retry-After, X-GitHub-OTP, X-RateLimit-Limit, X-RateLimit-Remaining, X-RateLimit-Used, X-RateLimit-Resource, X-RateLimit-Reset, X-OAuth-Scopes, X-Accepted-OAuth-Scopes, X-Poll-Interval, X-GitHub-Media-Type, X-GitHub-SSO, X-GitHub-Request-Id, Deprecation, Sunset"),("Access-Control-Allow-Origin","*"),("Strict-Transport-Security","max-age=31536000; includeSubdomains; preload"),("X-Frame-Options","deny"),("X-Content-Type-Options","nosniff"),("X-XSS-Protection","0"),("Referrer-Policy","origin-when-cross-origin, strict-origin-when-cross-origin"),("Content-Security-Policy","default-src 'none'"),("Vary","Accept-Encoding, Accept, X-Requested-With"),("Server","github.com"),("X-GitHub-Request-Id","BE6E:256B07:7AB4CE5:73749B5:6893D347")], responseBody = (), responseCookieJar = CJ {expose = []}, responseClose' = ResponseClose, responseOriginalRequest = Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } }) "{\"message\":\"Validation Failed\",\"errors\":[{\"resource\":\"PullRequest\",\"code\":\"custom\",\"message\":\"A pull request already exists for proxmox-update:auto-update/socket.\"}],\"documentation_url\":\"https://docs.github.com/rest/pulls/pulls#create-a-pull-request\",\"status\":\"422\"}")) [result] Failed to update socket 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath termproxy, using log file: /var/log/proxmox-nixos-update/termproxy/2025-08-06.log termproxy 0 -> 1 attrpath: termproxy [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - termproxy-1.1.0 Press Enter key to continue... Running update for: - termproxy-1.1.0: UPDATING ... - termproxy-1.1.0: ERROR --- SHOWING ERROR LOG FOR termproxy-1.1.0 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/termproxy/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: error: unable to read sha1 file of .cargo/config.toml (7b442dcf674edccc892ea58b5346836f514003ff) error: unable to read sha1 file of .gitignore (7480d9c25769f12dd151aa17f0c318637ee0fdb3) error: unable to read sha1 file of README (1efdc521328a22bd5e36c1a45d3889f9f3d74e75) error: unable to read sha1 file of termproxy/Makefile (5622380940467a23d9f993894fe6e858c57007f2) error: unable to read sha1 file of termproxy/debian/changelog (8f426428912f1d29ecf335c9c565fef1c98cd47d) error: unable to read sha1 file of termproxy/debian/control (1a26f1c17615d0acb3c6d967dff1457fe04bd540) error: unable to read sha1 file of termproxy/debian/copyright (8249a3a7152b62690ff3634c80a04231393699bc) error: unable to read sha1 file of termproxy/debian/docs (86966720abe22e8fe2915f531bb2d0db8832e2e7) error: unable to read sha1 file of termproxy/debian/links (3846526f728aa7073e01ee9729a93e7ae4e430f0) error: unable to read sha1 file of termproxy/debian/rules (add090bcc4451bbab1340ce980776f038c20a97e) error: unable to read sha1 file of termproxy/debian/source/format (89ae9db8f88b823b6a7eabf55e203658739da122) error: unable to read sha1 file of termproxy/src/cli.rs (9a451dbcd61225e7cfcbb826eb2264fb86efe577) error: unable to read sha1 file of termproxy/src/main.rs (454adf76864f5915a5362e64d77afd78f3c566b0) error: unable to read sha1 file of termproxy/src/pty.rs (2ba7498ee3b67c2fc7ab6ebe334c1da84a060fea) error: unable to read sha1 file of xterm.js/Makefile (378be9347036152dc55f6833074283bb8ae46a42) error: unable to read sha1 file of xterm.js/debian/changelog (79c769528186ad99fd502f57a1c784210d2d046b) error: unable to read sha1 file of xterm.js/debian/control (71cf01f64790841cb396831d0d58c0fc97d96324) error: unable to read sha1 file of xterm.js/debian/copyright (669f2ebebbc16dab87f3a9fd888851a8a6349aed) error: unable to read sha1 file of xterm.js/debian/docs (86966720abe22e8fe2915f531bb2d0db8832e2e7) error: unable to read sha1 file of xterm.js/debian/install (0291a3d94cfd562a575718432124745d1413d486) error: unable to read sha1 file of xterm.js/debian/rules (55b24ac462a868fc2bb2bf1cc9e176a80160998c) error: unable to read sha1 file of xterm.js/debian/source/format (163aaf8d82b6c54f23c45f32895dbdfdcc27b047) error: unable to read sha1 file of xterm.js/debian/source/lintian-overrides (01648c190a8a920646108b40c9fd1bb4ed1f28d7) error: unable to read sha1 file of xterm.js/src/addon-fit.js (038897193db54dd0f09783d53e602755b93a2eaf) error: unable to read sha1 file of xterm.js/src/addon-fit.js.map (b4502be7d565674431bc8bc65a9f207ae6101ddb) error: unable to read sha1 file of xterm.js/src/addon-webgl.js (8c4a2adc0e23472c56767e8af5536d0c4b17d3cb) error: unable to read sha1 file of xterm.js/src/addon-webgl.js.map (471f31b570ff5eb55fecbc1715299d7d9370e314) error: unable to read sha1 file of xterm.js/src/index.html.hbs.in (9857e9de7119948cf1193813e8ddf39b8805602b) error: unable to read sha1 file of xterm.js/src/index.html.tpl.in (0084158d89f56f7d7c540d122d90f2f9b4909915) error: unable to read sha1 file of xterm.js/src/main.js (902a1c37c67c88c360e9ef24e7a0258561947b04) error: unable to read sha1 file of xterm.js/src/style.css (04db7d5da777e09263dea0cbc5b52bf6d76251d1) error: unable to read sha1 file of xterm.js/src/util.js (52cad215616c4f6d107469c2c1584ab3ec05cccb) error: unable to read sha1 file of xterm.js/src/xterm.css (e97b6439055da076119d8ce42225944623b80e9b) error: unable to read sha1 file of xterm.js/src/xterm.js (7ca75f8e5ec2a0741333130fd63fb9c79d9c2023) error: unable to read sha1 file of xterm.js/src/xterm.js.map (ef37aec9487a1449579a8186db08ffab5a09f556) fatal: Could not reset index file to revision '@{u}'. --- SHOWING ERROR LOG FOR termproxy-1.1.0 ---------------------- The update script for termproxy-1.1.0 failed with exit code 1 [result] Failed to update termproxy 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-container, using log file: /var/log/proxmox-nixos-update/pve-container/2025-08-06.log pve-container 0 -> 1 attrpath: pve-container [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-container-5.2.6 Press Enter key to continue... Running update for: - pve-container-5.2.6: UPDATING ... - pve-container-5.2.6: ERROR --- SHOWING ERROR LOG FOR pve-container-5.2.6 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-container/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-container/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-container/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: pack has 2 unresolved deltas fatal: fetch-pack: invalid index-pack output --- SHOWING ERROR LOG FOR pve-container-5.2.6 ---------------------- The update script for pve-container-5.2.6 failed with exit code 1 [result] Failed to update pve-container 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath uuid, using log file: /var/log/proxmox-nixos-update/uuid/2025-08-06.log uuid 0 -> 1 attrpath: uuid [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-UUID-0.37 Press Enter key to continue... Running update for: - perl5.38.2-UUID-0.37: UPDATING ... - perl5.38.2-UUID-0.37: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update uuid 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath datadumper, using log file: /var/log/proxmox-nixos-update/datadumper/2025-08-06.log datadumper 0 -> 1 attrpath: datadumper [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-DataDumper-2.183 Press Enter key to continue... Running update for: - perl5.38.2-DataDumper-2.183: UPDATING ... - perl5.38.2-DataDumper-2.183: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update datadumper 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath digestsha, using log file: /var/log/proxmox-nixos-update/digestsha/2025-08-06.log digestsha 0 -> 1 attrpath: digestsha [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-DigestSHA-6.04 Press Enter key to continue... Running update for: - perl5.38.2-DigestSHA-6.04: UPDATING ... - perl5.38.2-DigestSHA-6.04: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update digestsha 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-storage, using log file: /var/log/proxmox-nixos-update/pve-storage/2025-08-06.log pve-storage 0 -> 1 attrpath: pve-storage [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-storage-8.3.2 Press Enter key to continue... Running update for: - pve-storage-8.3.2: UPDATING ... - pve-storage-8.3.2: ERROR --- SHOWING ERROR LOG FOR pve-storage-8.3.2 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-storage/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-storage/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-storage/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: pack has 32 unresolved deltas fatal: fetch-pack: invalid index-pack output --- SHOWING ERROR LOG FOR pve-storage-8.3.2 ---------------------- The update script for pve-storage-8.3.2 failed with exit code 1 [result] Failed to update pve-storage 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-manager, using log file: /var/log/proxmox-nixos-update/pve-manager/2025-08-06.log pve-manager 0 -> 1 attrpath: pve-manager [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-manager-8.3.5 Press Enter key to continue... Running update for: - pve-manager-8.3.5: UPDATING ... - pve-manager-8.3.5: ERROR --- SHOWING ERROR LOG FOR pve-manager-8.3.5 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-manager/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-manager/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-manager/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: pack has 3 unresolved deltas fatal: fetch-pack: invalid index-pack output --- SHOWING ERROR LOG FOR pve-manager-8.3.5 ---------------------- The update script for pve-manager-8.3.5 failed with exit code 1 [result] Failed to update pve-manager 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath iosocketip, using log file: /var/log/proxmox-nixos-update/iosocketip/2025-08-06.log iosocketip 0 -> 1 attrpath: iosocketip [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-IOSocketIP-0.42 Press Enter key to continue... Running update for: - perl5.38.2-IOSocketIP-0.42: UPDATING ... - perl5.38.2-IOSocketIP-0.42: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/perl-modules/iosocketip/default.nix b/pkgs/perl-modules/iosocketip/default.nix index 4ca37c7..38f84a2 100644 --- a/pkgs/perl-modules/iosocketip/default.nix +++ b/pkgs/perl-modules/iosocketip/default.nix @@ -6,11 +6,11 @@ perl538.pkgs.buildPerlModule rec { pname = "IOSocketIP"; - version = "0.42"; + version = "0.43"; src = fetchurl { url = "mirror://cpan/authors/id/P/PE/PEVANS/IO-Socket-IP-${version}.tar.gz"; - hash = "sha256-+Xo4RsUKTgZYzhciznzCrK2UcucEeL++nHlPsdtqaxM="; + hash = "sha256-6/Yhf0j1N66aeBJvDstLqj1IIOPiYVPOJQ87/9BfbQs="; }; passthru.updateScript = [ Received ExitFailure 1 when running Raw command: /nix/store/03a4f9rij2z4mmwprlbip3mrnnfaw0yd-nix-2.18.2/bin/nix-build --option sandbox true --arg config "{ allowBroken = true; allowUnfree = true; allowAliases = false; }" --arg overlays "[ ]" -A packages.x86_64-linux.iosocketip Received ExitFailure 1 when running Raw command: /nix/store/03a4f9rij2z4mmwprlbip3mrnnfaw0yd-nix-2.18.2/bin/nix --extra-experimental-features nix-command log -f . iosocketip Standard output: warning: Git tree '/var/cache/proxmox-nixos-update/worker/worktree/iosocketip' is dirty error: attribute 'iosocketip' in selection path 'iosocketip' not found [result] Failed to update iosocketip 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath nixmoxer, using log file: /var/log/proxmox-nixos-update/nixmoxer/2025-08-06.log nixmoxer 0 -> 1 attrpath: nixmoxer [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - nixmoxer-1.0.0 Press Enter key to continue... Running update for: - nixmoxer-1.0.0: UPDATING ... - nixmoxer-1.0.0: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update nixmoxer 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-docs, using log file: /var/log/proxmox-nixos-update/pve-docs/2025-08-06.log pve-docs 0 -> 1 attrpath: pve-docs [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-docs-8.3.1 Press Enter key to continue... Running update for: - pve-docs-8.3.1: UPDATING ... - pve-docs-8.3.1: ERROR --- SHOWING ERROR LOG FOR pve-docs-8.3.1 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-docs/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: pack has 4 unresolved deltas fatal: fetch-pack: invalid index-pack output --- SHOWING ERROR LOG FOR pve-docs-8.3.1 ---------------------- The update script for pve-docs-8.3.1 failed with exit code 1 [result] Failed to update pve-docs 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-access-control, using log file: /var/log/proxmox-nixos-update/pve-access-control/2025-08-06.log pve-access-control 0 -> 1 attrpath: pve-access-control [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-access-control-8.2.2 Press Enter key to continue... Running update for: - pve-access-control-8.2.2: UPDATING ... - pve-access-control-8.2.2: ERROR --- SHOWING ERROR LOG FOR pve-access-control-8.2.2 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-access-control/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-access-control/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-access-control/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: error: unable to read sha1 file of debian/control (f15a7a4fc936b01468ceac97280044e63899ae48) error: unable to read sha1 file of src/PVE/API2/AccessControl.pm (457a0a6616b0aaa8afa02b052cd2452722796b62) error: unable to read sha1 file of src/PVE/API2/TFA.pm (ddcf1774b6145c7f3a2e16e1a21e83c4d32aba22) fatal: Could not reset index file to revision '@{u}'. --- SHOWING ERROR LOG FOR pve-access-control-8.2.2 ---------------------- The update script for pve-access-control-8.2.2 failed with exit code 1 [result] Failed to update pve-access-control 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath markedjs, using log file: /var/log/proxmox-nixos-update/markedjs/2025-08-06.log markedjs 0 -> 1 attrpath: markedjs [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - markedjs-15.0.12 Press Enter key to continue... Running update for: - markedjs-15.0.12: UPDATING ... - markedjs-15.0.12: DONE. Packages updated! Diff after rewrites: diff --git a/pkgs/markedjs/default.nix b/pkgs/markedjs/default.nix index 1490ad4..0d9ab4b 100644 --- a/pkgs/markedjs/default.nix +++ b/pkgs/markedjs/default.nix @@ -7,16 +7,16 @@ buildNpmPackage rec { pname = "markedjs"; - version = "15.0.12"; + version = "16.1.2"; src = fetchFromGitHub { owner = "markedjs"; repo = "marked"; rev = "v${version}"; - hash = "sha256-GwKL1EsxiYijPAMNM9bO0RQ/aQBcQSUlOy6O73igH6U="; + hash = "sha256-RmeLGIZSgMRfwBKbWblGUA/k0w4I3CYARIt2qW6m+Qw="; }; - npmDepsHash = "sha256-tUE8GWlwXmHpCeWyI0ipvSO2PvJ2YB0uCX7gugzscF0="; + npmDepsHash = "sha256-7lO4bZ2ajCg0n3e3+2IYjYYAVC5ToSFuJ79U4/LvJzM="; passthru.updateScript = nix-update-script { extraArgs = [ "--flake" ]; }; Successfully finished processing skipping cachix Semi-automatic update generated by [nixpkgs-update](https://github.com/ryantm/nixpkgs-update) tools. This update was made based on information from passthru.updateScript. meta.description for markedjs is: A markdown parser and compiler. Built for speed meta.homepage for markedjs is: https://marked.js.org/ ###### Updates performed - Ran passthru.UpdateScript ###### To inspect upstream changes - [Release on GitHub](https://github.com/markedjs/marked/releases/tag/v16.1.2) - [Compare changes on GitHub](https://github.com/markedjs/marked/compare/v15.0.12...v16.1.2) ###### Impact Checks done --- - built on NixOS - Warning: a test defined in `passthru.tests` did not pass - found 16.1.2 with grep in /nix/store/4hmdigabxj0y5014wzrdxabkz087zik5-markedjs-16.1.2 - found 16.1.2 in filename of file in /nix/store/4hmdigabxj0y5014wzrdxabkz087zik5-markedjs-16.1.2 ---
Rebuild report (if merged into master) (click to expand) ``` 1 total rebuild path(s) 1 package rebuild(s) First fifty rebuilds by attrpath markedjs ```
Instructions to test this update (click to expand) --- Build yourself: ``` nix-build -A markedjs https://github.com/proxmox-update/nixpkgs/archive/7d10452b0a72d679ea60be19e5b954aea12fdfb5.tar.gz ``` Or: ``` nix build github:proxmox-update/nixpkgs/7d10452b0a72d679ea60be19e5b954aea12fdfb5#markedjs ``` After you've downloaded or built it, look at the files and if there are any, run the binaries: ``` ls -la /nix/store/4hmdigabxj0y5014wzrdxabkz087zik5-markedjs-16.1.2 ls -la /nix/store/4hmdigabxj0y5014wzrdxabkz087zik5-markedjs-16.1.2/bin ``` ---

### Pre-merge build results NixPkgs review skipped --- ###### Maintainer pings cc @camillemndn @JulienMalka for [testing](https://github.com/ryantm/nixpkgs-update/blob/main/doc/nixpkgs-maintainer-faq.md#r-ryantm-opened-a-pr-for-my-package-what-do-i-do). HTTPError (HttpExceptionRequest Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } (StatusCodeException (Response {responseStatus = Status {statusCode = 422, statusMessage = "Unprocessable Entity"}, responseVersion = HTTP/1.1, responseHeaders = [("Date","Wed, 06 Aug 2025 22:15:01 GMT"),("Content-Type","application/json; charset=utf-8"),("Content-Length","268"),("X-OAuth-Scopes","admin:enterprise, admin:gpg_key, admin:org, admin:org_hook, admin:public_key, admin:repo_hook, admin:ssh_signing_key, audit_log, codespace, copilot, delete:packages, delete_repo, gist, project, repo, user, workflow, write:discussion, write:packages"),("X-Accepted-OAuth-Scopes",""),("X-GitHub-Media-Type","github.v3; format=json"),("x-github-api-version-selected","2022-11-28"),("X-RateLimit-Limit","5000"),("X-RateLimit-Remaining","4989"),("X-RateLimit-Reset","1754521820"),("X-RateLimit-Used","11"),("X-RateLimit-Resource","core"),("Access-Control-Expose-Headers","ETag, Link, Location, Retry-After, X-GitHub-OTP, X-RateLimit-Limit, X-RateLimit-Remaining, X-RateLimit-Used, X-RateLimit-Resource, X-RateLimit-Reset, X-OAuth-Scopes, X-Accepted-OAuth-Scopes, X-Poll-Interval, X-GitHub-Media-Type, X-GitHub-SSO, X-GitHub-Request-Id, Deprecation, Sunset"),("Access-Control-Allow-Origin","*"),("Strict-Transport-Security","max-age=31536000; includeSubdomains; preload"),("X-Frame-Options","deny"),("X-Content-Type-Options","nosniff"),("X-XSS-Protection","0"),("Referrer-Policy","origin-when-cross-origin, strict-origin-when-cross-origin"),("Content-Security-Policy","default-src 'none'"),("Vary","Accept-Encoding, Accept, X-Requested-With"),("Server","github.com"),("X-GitHub-Request-Id","AB02:32DE7:75EA813:6EA3DD2:6893D3E4")], responseBody = (), responseCookieJar = CJ {expose = []}, responseClose' = ResponseClose, responseOriginalRequest = Request { host = "api.github.com" port = 443 secure = True requestHeaders = [("User-Agent","github.hs/0.28.0.1"),("Accept","application/vnd.github.v3+json"),("Authorization","")] path = "/repos/saumonnet/proxmox-nixos/pulls" queryString = "" method = "POST" proxy = Nothing rawBody = False redirectCount = 10 responseTimeout = ResponseTimeoutDefault requestVersion = HTTP/1.1 proxySecureMode = ProxySecureWithConnect } }) "{\"message\":\"Validation Failed\",\"errors\":[{\"resource\":\"PullRequest\",\"code\":\"custom\",\"message\":\"A pull request already exists for proxmox-update:auto-update/markedjs.\"}],\"documentation_url\":\"https://docs.github.com/rest/pulls/pulls#create-a-pull-request\",\"status\":\"422\"}")) [result] Failed to update markedjs 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath termreadline, using log file: /var/log/proxmox-nixos-update/termreadline/2025-08-06.log termreadline 0 -> 1 attrpath: termreadline [updateScript] [updateScript] Success [updateScript] Going to be running update for following packages: - perl5.38.2-TermReadLine-1.14 Press Enter key to continue... Running update for: - perl5.38.2-TermReadLine-1.14: UPDATING ... - perl5.38.2-TermReadLine-1.14: DONE. Packages updated! The diff was empty after rewrites. [result] Failed to update termreadline 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-http-server, using log file: /var/log/proxmox-nixos-update/pve-http-server/2025-08-06.log pve-http-server 0 -> 1 attrpath: pve-http-server [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-http-server-5.2.2 Press Enter key to continue... Running update for: - pve-http-server-5.2.2: UPDATING ... - pve-http-server-5.2.2: ERROR --- SHOWING ERROR LOG FOR pve-http-server-5.2.2 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-http-server/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: missing blob object '4ce036829b0a9d15a6d8d6c2211e2057ecd5ba3e' error: git://git.proxmox.com/git/pve-http-server.git did not send all necessary objects --- SHOWING ERROR LOG FOR pve-http-server-5.2.2 ---------------------- The update script for pve-http-server-5.2.2 failed with exit code 1 [result] Failed to update pve-http-server 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-cluster, using log file: /var/log/proxmox-nixos-update/pve-cluster/2025-08-06.log pve-cluster 0 -> 1 attrpath: pve-cluster [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-cluster-8.0.10 Press Enter key to continue... Running update for: - pve-cluster-8.0.10: UPDATING ... - pve-cluster-8.0.10: ERROR --- SHOWING ERROR LOG FOR pve-cluster-8.0.10 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-cluster/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: fatal: missing blob object 'aa4da96f5d74077b17e52601b65d090ee31a5ca1' error: git://git.proxmox.com/git/pve-cluster.git did not send all necessary objects --- SHOWING ERROR LOG FOR pve-cluster-8.0.10 ---------------------- The update script for pve-cluster-8.0.10 failed with exit code 1 [result] Failed to update pve-cluster 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-edk2-firmware, using log file: /var/log/proxmox-nixos-update/pve-edk2-firmware/2025-08-06.log pve-edk2-firmware 0 -> 1 attrpath: pve-edk2-firmware [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-edk2-firmware-4.2025.02-3 Press Enter key to continue... Running update for: - pve-edk2-firmware-4.2025.02-3: UPDATING ... - pve-edk2-firmware-4.2025.02-3: ERROR --- SHOWING ERROR LOG FOR pve-edk2-firmware-4.2025.02-3 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-edk2-firmware/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-edk2-firmware/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-edk2-firmware/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: error: unable to read sha1 file of debian/changelog (97e21ee780975a84f289d1b421c9326bc98ea988) error: unable to read sha1 file of debian/control (632cea53bd2164a31f1f19f4bf04b628d0905b09) error: unable to read sha1 file of debian/edk2-vars-generator.py (351e556211005601e03fb76229bcc4ec54678c62) error: unable to read sha1 file of debian/patches/UefiCpuPkg-MpInitLib-Fix-split-lock-violation-from-M.patch (e68278add26aaab1dde4175bc04053ee6160d3f0) error: unable to read sha1 file of debian/patches/series (f9e35827ae0cb277592012b3045171e5edd268d7) error: unable to read sha1 file of debian/python/UEFI/Qemu.py (5e1ee874197064945385dea48eab9cbd88a76642) error: unable to read sha1 file of debian/rules (494f162e304dc27b6afc8441cf40e84d804946a0) fatal: Could not reset index file to revision '@{u}'. --- SHOWING ERROR LOG FOR pve-edk2-firmware-4.2025.02-3 ---------------------- The update script for pve-edk2-firmware-4.2025.02-3 failed with exit code 1 [result] Failed to update pve-edk2-firmware 0 -> 1 [options] github_user: proxmox-update, pull_request: YES, batch_update: NO, calculate_outpaths: NO, cve_report: NO, nixpkgs-review: NO, nixpkgs_dir: "/var/cache/proxmox-nixos-update/worker/proxmox-nixos", use attrpath: NO For attrpath pve-firewall, using log file: /var/log/proxmox-nixos-update/pve-firewall/2025-08-06.log pve-firewall 0 -> 1 attrpath: pve-firewall [updateScript] [updateScript] Failed with exit code 1 Going to be running update for following packages: - pve-firewall-5.0.7 Press Enter key to continue... Running update for: - pve-firewall-5.0.7: UPDATING ... - pve-firewall-5.0.7: ERROR --- SHOWING ERROR LOG FOR pve-firewall-5.0.7 ---------------------- Traceback (most recent call last): File "/var/cache/proxmox-nixos-update/worker/worktree/pve-firewall/pkgs/update.py", line 157, in main() File "/var/cache/proxmox-nixos-update/worker/worktree/pve-firewall/pkgs/update.py", line 52, in main run_command('git fetch origin && git reset --hard @{u} && git clean -fd') File "/var/cache/proxmox-nixos-update/worker/worktree/pve-firewall/pkgs/update.py", line 16, in run_command raise RuntimeError(error_message) RuntimeError: Command 'git fetch origin && git reset --hard @{u} && git clean -fd' failed with error: error: unable to read sha1 file of Makefile (b5c96a5c8f85e7bfb7de0b38157dd39399ad0346) error: unable to read sha1 file of src/PVE/API2/Firewall/Aliases.pm (eaafe6864de93ce34dbf1e615a6221c2fda26917) error: unable to read sha1 file of src/PVE/API2/Firewall/Cluster.pm (51d0e43878f75aaf028742c57aefa1ae3cb91c74) error: unable to read sha1 file of src/PVE/API2/Firewall/Groups.pm (a897a1b7dc9049b3998bc92331109c0f9c0884e3) error: unable to read sha1 file of src/PVE/API2/Firewall/Helpers.pm (0fb71f7dce9db73024fadc29564b84839fa0b70c) error: unable to read sha1 file of src/PVE/API2/Firewall/Host.pm (14a0efcc016798bca25feefd995aa10ad95294c9) error: unable to read sha1 file of src/PVE/API2/Firewall/IPSet.pm (43a51a724581e3dd71d12fcec7d2df70e14faf36) error: unable to read sha1 file of src/PVE/API2/Firewall/Rules.pm (992ad9a1a9558893436d9561e717ec64a141a0a8) error: unable to read sha1 file of src/PVE/API2/Firewall/VM.pm (c3a5acce9dd1ec676414e1cb8db58de75acd7d03) error: unable to read sha1 file of src/PVE/API2/Firewall/Vnet.pm (7d72361021607a51c562e151d194a530eb5e0eb4) error: unable to read sha1 file of src/PVE/Service/pve_firewall.pm (95901a5458891cc32bb9d88bb00f5586b7b8dc31) error: unable to read sha1 file of test/fwtester.pl (b14ad9dfd98f3874b5078e5273c3180bc71a79e4) fatal: Could not reset index file to revision '@{u}'. --- SHOWING ERROR LOG FOR pve-firewall-5.0.7 ---------------------- The update script for pve-firewall-5.0.7 failed with exit code 1 [result] Failed to update pve-firewall 0 -> 1